The CamJam XT is the ultimate tie-down tool to make light work of securing your heavier loads. The CamJam XT Aluminum Rope & Cord Tighteners are a rugged combination of carabiner and cam mechanism. Paired with a rope or cord, the CamJam XT will quickly become your favorite new solution for tightening, tensioning, connecting, and securing serious loads.
The CamJam XT products feature a carabiner clip and gate on one end, and a rotating cam mechanism on the other. This clever design allows the CamJam XT to be configured in either a Fixed End or a Loop System to securely tie down lumber, gear, and other heavy loads. In both systems, the CamJam XT can be easily adjusted and re-adjusted time and again to tackle a multitude of tie-down projects over the years. The XT holds cord from 1/16"-3/16" [2mm-5mm] in width.
To use the Fixed End System: simply anchor the carabiner to any hook, D-ring, or loop, and feed the cord or rope through the cam until you've reached the desired level of tension. Next, pull the cord firmly and the cam locks into place and stays that way until you release it.
To use the Loop System: Tie a knot to create a loop in one end of your rope or cord. Clip the CamJam XT into that loop, then pull the other end or rope through the cam mechanism. This loop system enables you to bundle or wrap heavy loads and easily secure them.
To Release the Cam: simply rotate the cam lock lever and pull your rope or cord upward.
Allows you to tighten, tension, connect and secure heavy loads by simply pulling your rope or cord through the cam mechanism
Easy to adjust and release tension by rotating the cam lock lever
CamJam XT and 1 x 16’ (4.88m) section of 550 paracord
Two attachment methods for ultimate versatility - Loop System and Fixed End System