Paddlesport & Bike Racks
EcoRack J Style Kayak Carrier
$114.95 CAD
-
The J-Rack is the answer for the paddler who wants a safe secure transport but is limited by a tight budget.
These carriers easily handle most sit-inside, and, sit-on-top kayaks. (Note: May not be suitable for wider and/or deeper kayaks such as tandems and fishing kayaks) Features include a universal fit hardware package for round, square and oval cross bars. Kit includes ¼” waterproof safety tie-downs and cam-style load straps.
Please Note: The base of the carrier has a rectangular "cutout" that has been included for square cross bar fit. This "cutout" does not affect the fit or function of the carriers when installed to round or oval shaped cross bars.
-
- Adjustable rear foam pads to protect the boat's finish
- Universal mounting hardware fits nearly all racks
- Corrosion resistant mounting bolts and ergonomic tightening knobs
- Black coated corrosion resistant finish
- Load straps and safety tie-downs
- One Year Warranty
- Adjustable rear foam pads to protect the boat's finish
-
- Weight: 11.5 lb
- Length: 16"
- Width: 6"
- Height: 16.5"
- Load capacity: 75 lb
Includes: - (2) J-Rack Kayak Carriers
- (1) Mounting Hardware Kit
- (2) Cam buckle Load Straps
- (2) Bow and Stern Safety Tie-down Lines
- (1) Instruction Manual
Click here for instruction manual
- Weight: 11.5 lb
Malone 25" Rack Pads
$38.95 CAD
-
Extra long 25" Rack Pads extend the protective surface area over the load bars for larger and wider transport requirements. Sold in sets of two.
Combine with our MPG200 series Universal Cross Rail System and MPG307-15 Load Straps for a complete and affordable rooftop carrier system.
-
- Velcro hook & loop closure system for a solid confident fit
- Two shock cords per pad for additional retention strength
- High density foam padding prevents load abrasion
- Water resistant nylon outer sleeve for long life
- Recommended for square, round and factory oval load bars
Malone 30" Rack Pads
$46.95 CAD
-
Racks pads are a simple, safe and effective way to transport watercraft when rooftop load bars are in-place. The Malone 30" standard rack pads are designed for standup paddle boards. Sold in sets of two and provided with a one year warranty to ensure customer satisfaction. -
- Fade resistant polyester construction
- Velcro and shock cord fastening system
- Fits round, square or some factory load bars
-
- Weight: 1 lb
- Length: 30"
- Width: 4"
- Height: 2"
Malone Canoe Kit Standard
$54.95 CAD
-
The Standard Canoe Kit is a low cost option to transport a canoe. The 6" gunnel style non-skid blocks feature a universal cut-out profile that fits round, square and oval load bars. Includes two 15' load straps and two safety tie-downs. Made in the USA with EVA closed cell foam.
-
- 6" long non-skid EVA foam universal fit blocks
- 15' cam buckle load straps to secure the canoe
- Safety tie-downs to fully ensure a safe installation
- Travel tote that holds the kit when not in use
- Length: 6" (per block)
- Width: 4.75" (per block)
- Height: 3.75" (per block)
- Load capacity: 1 boat up to 110 lb
- 6" long non-skid EVA foam universal fit blocks
Malone Channel Loader Kayak Load Assist Module
$99.95 CAD
-
The Channel Loader™ is an incredibly simple to use kayak loader that works with nearly any vehicle and fits most boat hull configurations. The design includes an extra tall frame that reaches over most spoilers, and a narrow footprint to allow loading of two kayaks on the vehicle's rooftop. Other features include an over-sized 10" wide conical roller to improve boat control and a three-position adjustment system to match any angular loading requirement. The heavy-duty toggle activated vacuum cups have non-marking pads that protect the vehicle's sheet metal from abrasion. Stores in the trunk or hatch when not in use.
Note: For sedan style vehicles, two individual MPG367 Channel Loaders™ are recommended.
-
- V-shaped roller works with most kayaks
- Corrosion resistant construction
- Fits most SUV's, sedans and hatchbacks
- Three position loading adjustment
- Stores in the vehicle when not in use
- Easily installs in seconds
- Lifetime Limited Warranty
- V-shaped roller works with most kayaks
-
- Weight: 3.5 lbs
- Length: 9"
- Width: 16.5"
- Height: 4"
- Load Capacity: 75 lb
Includes: - (1) Extended Frame with V-Roller
- (2) Vacuum Cups
- (1) Vacuum Cup Mounting Hardware
- (1) Instruction Manual
- Weight: 3.5 lbs
Malone Deluxe Kayak Foam Block Kit
$79.95 CAD
-
The updated packaging features an environmentally friendly mesh travel tote that can be continuously reused. These high-end foam kits include everything required to safely and affordably transport one kayak on either a bare roof or with a vehicle equipped with load bars.
The 18" blocks feature a universal cut-out profile that will fit round, square and oval load bars. When used on a bare roof, the padded bottoms provide anti-slip containment and protect the vehicles finish. Includes two 15' cam style load straps, 10' block straps and safety tie-downs with S-Hooks. -
- (2) 18" long foam blocks to transport most kayaks
- (2) 15' load straps for a confident transport
- (2) 10' block straps to capture and prevent side to side movement
- (2) Safety tie-downs to fully ensure a safe installation
- (1) Custom mesh travel bag holds the kit when not in use
- (2) 18" long foam blocks to transport most kayaks
Malone Downloader
$259.95 CAD
-
The DownLoader™ is Malone's premium J-Style carrier with features for low clearance, ease of loading and universal fit for most load bars. These carriers also include corrosion proof frames, molded strap bales, replaceable base pads, replaceable upper sleeves and a new fold-down release design for 2020.
The universal mounting system fits a large cross section of aftermarket load bars (round, square and oval) as well as most factory systems. Also includes two lengths of mounting bolts to achieve the best rack installation. Comes with cam style load straps and bow & stern safety tie-downs.
-
- Fold-down frame for low clearance access
- Boarding ramp for easy loading
- Corrosion resistant aluminum construction
- Oversize foam padding with replaceable acrylic fabric sleeves
- 11' load straps and safety tie-downs
- Jawz2™ universal fit mounting hardware
- 60mm and 70mm mounting bolts
- Compatible with the MPG351-XL Telos™ Load Assist
- Fold-down frame for low clearance access
-
- Weight: 12.2 lb
- Length: 17"
- Width: 6"
- Height: 19.5" (when deployed) - 6" (when folded down)
- Load Capacity: 75 lb
Includes: - (2) DownLoader™ Kayak Carriers
- (1) Jawz2™ Kit with Mounting Hardware
- (2) 11' Cam Buckle Straps
- (2) Bow and Stern Safety Lines
- (1) Instruction Manual
Click here for instruction manual
- Weight: 12.2 lb
Malone Foam Block - Canoe
$9.95 CAD
Not all foam blocks are created equal! These Malone Canoe Blocks have slots on both sides to accommodate the canoe gunwales as well as roof rack crossbars. They also offer...
Malone Foam Block - Canoe 6" Pair
$17.95 CAD
These 6" Canoe Foam Blocks are a great product when replacement is required, or for the "do it yourself" paddler that is creating their own set-up. Sold in set of...
Malone Foam Block - Kayak 14"
$20.95 CAD
Not all foam blocks are created equal! These 14" wide Malone Kayak Blocks have slots on the bottom to accommodate roof rack crossbars. They also offer a non-skid bottom for...
Malone Foam Block - Kayak 18"
$22.95 CAD
Not all foam blocks are created equal! These 18" wide Malone Kayak Blocks have slots on the bottom to accommodate roof rack crossbars. They also offer a non-skid bottom for...
Malone Foam Block - SUP
$31.95 CAD
Not all foam blocks are created equal! These Malone SUP Blocks have slots on the bottom to accommodate roof rack crossbars. They also offer a non-skid bottom for better performance...
Malone FoldAway-5 Multi Rack
$259.95 CAD
-
The FoldAway-5™ can carry a single recreational or touring kayak on it's side, vertically stack two kayaks, carry a canoe or large sit-on-top kayak, and transport any size SUP. Featuring a pair of quick-release fold-down frames with removable 2-boat modules for transporting wide loads. Each set of carriers are built with corrosion resistant coated steel, thick over-sized padding and heavy duty molded parts.
The universal mounting system fits a large cross section of aftermarket load bars (round, square and oval) as well as most factory systems. Also includes two lengths of mounting bolts to achieve the best rack installation. Comes with cam style load straps, bow & stern safety tie-downs and SUP foam pads. Product workmanship and material performance is guaranteed with Malone's Lifetime Limited Warranty.
-
- Quick release fold-down frames for low clearance
- Universal mounting adapters fit most load bar designs
- MultiRack extension modules to carry SUPs & canoes
- SUP insert pads to cushion and provide hull protection during transport
- Two lengths of mounting bolts for improved bar fit
- Includes 11' load straps and tie-downs for two boats
- Weight: 14.5 lb
- Dimensions (folded): 19.5" x 8.5" x 3.5"
- Dimensions (deployed): 19.5" x 8.5" x 14"
- Load Capacity: 2 boats - 75 lb maximum weight limit per boat
- Compatible with most load bars up to 1.5" tall x 3.5" wide (use 75mm bolts provided)
- Quick release fold-down frames for low clearance
-
- (2) Fold-Down Carriers
- (2) MultiRack Extension Modules
- (16) M6 x 1mm zinc coated 60mm Mounting Bolts
- (16) M6 x 1mm zinc coated 75mm Mounting Bolts
- (16) M6 T-Knobs
- (8) Universal Mounting Brackets
- (2) SUP Foam Blocks
- (4) 11' Cam Buckle Load Straps
- (4) Bow and Stern Safety Lines w/ S-Hooks
- (1) Instruction Manual
- Bow and stern safety tie-downs are required for all rooftop transport(s). Failure to correctly install and use safety tie-down lines voids all warranty and liability.
- Carefully review instructions and register your warranty prior to first time use.
- Malone carriers come with two lengths of mounting bolts in order to achieve the best cross bar fit. Retain unused bolts for future use with different cross bars.
- The carrier base has a rectangular "cutout" for square cross bar fit. The "cutout" will not affect the fit or function when installed to round or oval cross bars.
- (2) Fold-Down Carriers
Malone FoldAway-J Kayak Carrier
$189.95 CAD
-
The FoldAway-J™ is exclusively designed to safely carry a single recreational or touring kayak on its side. These carriers feature quick-release fold-down frames for low clearance and improved gas mileage when not in use. Built with corrosion resistant coated steel, over-sized padding, heavy duty molded parts and a unique mounting design.
This universal mounting system fits a large cross section of aftermarket load bars (round, square and oval) as well as most factory systems. The dual mount locations ensure the carriers are firmly in place and eliminate side to side movement. Also includes two lengths of mounting bolts to achieve the best rack installation. Comes with cam style load straps and safety tie-downs. Product workmanship and material performance is guaranteed with Malone's Lifetime Limited Warranty. -
- Weight: 10 lb
- Dimensions (folded): 19.5" x 8.5" x 3.5"
- Dimensions (deployed): 19.5" x 8.5" x 14"
- Load Capacity: 1 boat - 75 lb maximum weight limit per boat
- Compatible with most load bars up to 1.5" tall x 3.5" wide (use 75mm bolts provided)
- Quick release fold-down frames for low clearance
- Universal mounting adapters fit most load bar designs
- Two lengths of mounting bolts for improved bar fit
- Includes 11' load straps and tie-downs for a single kayak
- Lifetime Limited Warranty
- Weight: 10 lb
-
- (2) Fold-Down Carriers
- (8) M6 x 1mm zinc coated 60mm Mounting Bolts
- (8) M6 x 1mm zinc coated 75mm Mounting Bolts
- (8) M6 T-Knobs
- (4) Universal Mounting Brackets
- (2) 11' Cam Buckle Load Straps
- (2) Bow and Stern Safety Lines w/ S-Hooks
- (1) Instruction Manual
- (2) Fold-Down Carriers
Malone J-Cradle
$89.99 CAD $129.95 CAD
-
The J-Cradle is a basic, affordable J-style carrier. This cradle offers a rock solid carrier system for the discerning customer who demands a high quality product but has a limited budget.
The steel tubular frames provide maximum strength and holding power for long road trips and large kayaks. For rust protection, there's three layers of corrosion resistant coating that ensure years of continued transport service.
Each carrier has adjustable rear foam padding for great boat protection and a felt pad on the base.
Furnished with all hardware, cam buckle load straps and bow & stern safety tie-downs for one kayak.
-
- Tubular steel frame for maximum transport strength
- Three layers of corrosion resistant coating
- "No tools required" mounting hardware
- Adjustable rear padding for great boat protection
- Universal fit hardware for round, square and factory oval load bars
- Lifetime warranty
-
- Capacity: For kayaks up to 34" wide and 75 LB
- Dimensions: 16" (L) x 6" (W) x 16.5" (H)
- Frame: Coated steel, Injection molded nylon
- Weight: 12 LB (set of 2)
Malone J-Pro 2
$174.95 CAD
-
The J-Pro2 is Malone's upgraded J-Cradle carrier with enhanced foam padding and acrylic sleeves to better protect the kayak. Fits most sit-inside and sit-on-top kayaks. This mid-priced carrier features a silver finish with multiple layers of corrosion resistant coating and universal fit hardware. Includes Lifetime Limited Warranty.
-
- Silver coated corrosion resistant protective finish
- Molded base plates and stainless steel rivets
- Full length acrylic covered rear foam pads (replaceable)
- 11' load straps and safety tie-downs
- Jawz universal mounting hardware for most rack styles
- 60mm and 70mm mounting bolts (Note: Longer bolts available in Accessories)
- Fits aluminum T-style car and truck racks (Note: Hardware available in Accessories)
- Assembled in the USA
- Lifetime Limited Warranty
- Silver coated corrosion resistant protective finish
-
- Weight: 11.5 lb
- Length: 16"
- Width: 6"
- Height: 16.5"
- Load capacity: 75 lb
- Weight: 11.5 lb
Malone Kayak Kit Standard
$54.95 CAD
-
The Standard Kayak Kit includes everything needed to safely and affordably transport one kayak. The 14" blocks feature a universal cut-out profile that fits round, square and oval load bars. Includes two 15' load straps and safety tie-downs. Made in the USA with the finest EVA closed cell foam.
-
- 14" long foam blocks to transport most kayaks
- Two 15' load straps for a confident transport
- Safety tie-downs to fully ensure a safe installation
- Reusable packaging holds the kit when not in use
- 14" long foam blocks to transport most kayaks
-
- Weight: 3.3 lb
- Length: 14" (per block)
- Width: 4.75" (per block)
- Height: 3.75" (per block)
- Load capacity: 55 lb
- Installation:
- Bow and stern safety tie-downs are required for all rooftop transport(s).
- Prior to installation, carefully clean the roof of the vehicle and bottoms of the foam blocks to avoid scuff marks from dirt & dust.
- All foam block kits use straps that can potentially allow rain water to enter the vehicle.
- Bow and stern safety tie-downs are required for all rooftop transport(s).
- What's Included:
- (2) 14" Foam Blocks
- (2) 15' Cam Buckle Load Straps
- (2) Bow and Stern Lines
- (1) Reusable Packaging
- (1) Instruction Manual
- Weight: 3.3 lb
Malone Paddle Board Kit DLX
$109.95 CAD
-
The Deluxe Paddleboard Kit is an economic entry level system that works with or without vehicle cross bars. The oversized rooftop blocks can handle any size of SUP or surfboard currently on the market. Each block features a non-slip TPR bottom that works great on a bare roof.
The set also includes two 22" spacer pads which allow two boards to be transported safely without damage. Simply place the pads between the boards and tighten with the 15' heavy duty load straps.
Each set comes complete with a reusable tote bag and step by step instructions.
-
- 24" oversize rooftop blocks with non-slip bottoms
- 22" spacer pads that protect the boards when stacking
- Profiled to fit round, square and factory oval roof racks
- UV resistant construction for long life
- 15' heavy duty load straps with cam buckles & buckle protectors
- Reusable plastic tote bag
- One year warranty
-
- Capacity: 70 LB (32kg)
- Weight: 2.75 LB (4.2 kg)
- Block Dimensions: 24"(length) x 4.75"(width) x 4"(height)
Malone SeaWing
$219.95 CAD
-
The SeaWing™ combines single saddle design and mid-point mounting to aid quick set-up and provide extra roof space. The low profile of the SeaWing will flex to gently cradle your boat and improve gas mileage -
- Only bottom down carrier in the market that allows roof space to transport two kayaks because of the mid-point mounting system
- Single cradle design provides easier set-up by eliminating the need to individually adjust each saddle in a four point carrier
- Gentle flex protects kayak at all times
- Universal Fit JAWZ Mounting Hardware works with Round, Square and Most Factory Oval Cross Rails
- Can assemble or transfer to another vehicle in minutes with "No Tools Required"
- Corrosion Free and UV Resistant
- Cam Style Load Straps with Buckle Protectors
- 50mm and 60mm Pre-coated mounting bolts (larger bolts available for purchase if needed)
- Economical to add Stinger Load Assist Module (also sold as a Combo package) that facilitates single person loading and eliminates contact between kayak and vehicle
Malone SeaWing/Stinger Combo
$329.95 CAD
-
The SeaWing™ Stinger™ Combo is the most versatile and affordable carrier / loader system available in the market today. It doesn't get any easier than this to get out and enjoy your kayak. -
- Sliding padded V-block extends 22" behind the carrier to secure, align and hold the kayak in place during loading
- Padded frame protects kayak and vehicle and eliminates any contact during loading
- Loading frame easily retracts back under carrier during transport
- Combo system has all the bottom down carrier features of the SeaWing including roof space for transporting two kayaks
- Universal Fit JAWZ Mounting Hardware works with Round, Square and Most Factory Oval Cross Rails
- Can assemble or transfer to another vehicle in minutes with "No Tools Required"
- Corrosion Free and UV Resistant
- Cam Style Load Straps with Buckle Protectors
- 70mm Pre-coated mounting bolts (larger bolts available for purchase if needed)
-
- Capacity: 70 lb / 32" Wide Kayak
- Dimensions: 27.5"(length) x 6"(width) x 4.5"(height)
- Frame: Corrosion Proof Polycarbon
- Padding: Ribbed Synthetic Rubber
Malone Stax Pro 2
$204.95 CAD
-
The Stax Pro2 is the combination of intelligent design, excellent workmanship, superior strength and affordable pricing. This two boat transport system delivers a safe and secure trip to the water and back and assures a great paddling experience. Features a fold-down frame design for low clearance and foam blocks to protect the kayaks from cross bar abrasion. Comes with all required straps, mounting hardware and safety lines to safely transport two kayaks.
Note: The base of the carrier has a rectangular "cutout" that has been included for square cross bar fit. This "cutout" does not effect the fit or function of the carriers when installed to round or oval shaped cross bars.
Note: All Malone carriers come with two lengths of installation hardware (hex bolts). Cross bars can vary in thickness and having two lengths to choose from allows the consumer to select the best fit for their application. We recommend that the unused set of hardware be retained for future use with a different vehicle or cross bars. -
- Open gate head design easily and securely captures load straps
- Universal fit mounting hardware
- 50mm and 60mm mounting bolts (Note: Longer bolts available in Accessories / Hardware & Mounting Kits)
- Cam style load straps and 10' safety tie-downs
- Fold-down design for low clearance needs
- Foam stacker blocks to protect the kayaks
- Octagonal aluminum post construction
- Corrosion resistant molded components
- Made in the USA
- Lifetime Limited Warranty
- 5"x 5" x 20" high
Malone Stinger Load Module
$149.95 CAD
-
The Stinger™ permanently attaches to the MPG107 SeaWing™ to create the most versatile bottom down carrier / loader combination in the industry. This system makes loading and transporting a kayak simple and easy for one person. -
- Sliding V-block Frame Extends 22" To Capture and align the Kayak for loading and then Retracts For Transport
- Padded Frame Will Never Scratch the Kayak or the Vehicle
- Corrosion Free and UV Resistant
- Furnished with 70mm pre-coated mounting bolts
- Integrated Design that Permanently Attaches to the MPG107M SeaWing™ (Sold Separately)
-
- Capacity: 70 lb kayak
- Dimensions: 25" (length) x 8" (width) x 4" (height)
- Frame: Corrosion Free Polycarbon
- Padding: Ribbed Synthetic Rubber
Malone T-Slot Integration Hardware Kit - Aero-Style Crossbars
$28.95 CAD
-
MPG6604 T-slot Mounting Kit replaces the standard MPG300 series mounting kits that contain Jawz, T-knobs and M8 mounting bolts. The MPG6604 utilizes the T-slot in all Malone aero bars and most aftermarket aluminum load bars with T-slots.
Provides a seamless look to the carrier installation and allows more under bar clearance. Fits MPG114 Downloader, MPG116 J-Pro, MPG117 J-Pro 2 and MPG118 J-Loader. Sold in sets of four. -
- T-slot hardware kit fits all Malone Aero Bars and most aftermarket aluminum bars with top side T-slots
- Includes a custom hex wrench for quick installation of this upgraded fit kit
- Fits the MPG114, MPG116, MPG117, MPG118 Malone carriers
-
- M8 fine thread bolts
- Custom designed T-slot nuts
- Electroplated hardware for corrosion resistance.
- What’s In The Box:
- (1) Set of Four, T-Slot Nuts
- (1) Set of Four, M8 Bolts
- (1) Allen Wrench
- (1) Installation Card
Malone T-Slot Integration Hardware Kit - Truck Racks
$43.95 CAD
-
MPG8287 T-slot Mounting Kit replaces the standard MPG300 series mounting kits that contain Jawz, T-knobs and M8 mounting bolts. The MPG8287 utilizes the T-slot in most aftermarket aluminum truck racks with top side T-slots.
Provides a seamless look to the carrier installation and allows more under bar clearance. Fits the MPG114 Downloader, MPG116 J-Pro, MPG117 J-Pro 2 and MPG118 J-Loader. Sold in sets of four. -
- T-slot hardware kit fits most aftermarket aluminum truck racks with top side T-slots
- Includes a custom hex wrench for quick installation of this upgraded fit kit
- Fits the MPG114, MPG116, MPG117 and MPG118 Malone carriers
-
- M8 fine thread bolts
- Custom designed T-slot nuts
- Electroplated hardware for corrosion resistance.
- What’s In The Box:
- (1) Set of Four, T-Slot Nuts
- (1) Set of Four, M8 Bolts
- (1) Allen Wrench
- (1) Installation Card
Malone Telos XL Load Assist Module
$589.95 CAD
-
The Telos™XL temporarily attaches to J-style carriers (DownLoader™ - J-Loader™ - AutoLoader™) and the SeaWing™ V-style carriers. This lift assist provides a safe way to vertically raise the kayak into a position where it can easily be loaded into the carriers. You can detach the Telos™ XL and use it on the other side of the vehicle to load your second kayak, or, store it in the trunk for unloading later. The new ground level adjustable extensions totally avoid contact with the vehicle's sheet metal. There is simply no other load assist on the market with this versatility or value. Comes with assembly tools, instructions and Malone Lifetime Limited Warranty.
This item is oversized and incurs a surcharge when shipping.
-
- Self-locking vertical ratchets for ensured safety
- Adjustable bottom extensions with pivoting feet
- Fully padded steel cradles help protect the kayak
- Quick release detachment system to load a 2nd kayak
- Sized to conveniently store in the trunk
- Made in the USA
- Lifetime Limited Warranty
-
- Weight: 19 lb
- Length (Extended): 98.25"
- Length (Retracted): 58.75"
- Width: 6"
- Load Capacity: 75 lb
Malone Telos XL Universal Roof Rack Adapter
$85.95 CAD
-
The Multi Rack Adapter fastens to the vehicle’s cross bars and provides an attachment for installing the TelosXL™ Lift Assist. These adapters solve the issue of keeping your existing carriers while utilizing the Telos™ or Telos™XL for ease of loading and unloading.
Includes two lengths of mounting bolts for improved fit. Attaches to most cross bar profiles (round, square & oval) and sold in sets of two. The Multi Rack Adapter comes preassembled and complete with instructions for a simple installation. All parts and product workmanship are guaranteed with a Lifetime Limited Warranty. -
- Weight: 6 lb
- Length: 10"
- Width: 5.5"
- Height: 4"
- Load Capacity: 75 lb
- Maximum Bar Size: Fits up to 3.75" wide x 1.5" tall cross bars
- Minimum Bar Footprint: Requires only 3" of cross bar space to install
- Small footprint - Adapter can be mounted either on the inside or outside of the tower. Requires 3''of space to install.
- Compatible with round, square and most oval shaped factory or aftermarket cross bars
- Low profile for garage and low ceiling clearance
- 60mm & 70mm mounting bolts for improved fit
- Designed to be used exclusively with the Telos™ and Telos™XL Lift Assist
- Lifetime Limited Warranty
- Weight: 6 lb
Thule Compass 4 in 1
$399.95 CAD
-
Versatile water sport carrier that can transport either kayaks or stand-up paddle boards with one system.
- Multiple ways to carry: Single kayak in J-style or saddle configuration, two kayaks in stacker mode and up to two SUPs in saddle mode
- Two sets of load straps with BuckleBumpers and bow and stern tie downs included
- Quickly folds down flat when not in use for better aerodynamics
- Fits all rack systems with the universal mounting hardware and quick to install with no tools required
- Accommodates kayaks up to 36” wide and a maximum kayak weight of 130 lbs
Ships to Canada Only
-
- Multiple ways to carry: Single kayak in J-style or saddle configuration, two kayaks in stacker mode and up to two SUPs in saddle mode
- Maximum protection of kayaks and stand-up paddle boards thanks to the thick rubber saddles and padded upright
- Easily manage load straps while strapping down the kayaks using the integrated StrapCatch (two sets of load straps with BuckleBumpers and bow and stern tie downs included)
- Quickly folds down flat when not in use for better aerodynamics
- Fits all rack systems with the universal mounting hardware and quick to install with no tools required
- Accommodates kayaks up to 36” wide and a maximum kayak weight of 130 lbs
- Rubber cover for strap buckle
- Maximum load: 59 kg
- Dimensions: 81 x 18 x 48 cm
- Weight: 9 kg
- Fits: Thule WingBar Evo, Thule AeroBlade Edge, Thule WingBar, Thule SquareBar, Thule ProBar
Thule DockGlide
$349.95 CAD
-
A flexible, kayak carrier with felt-lined saddles that make it easier to load and unload.
-
- Easily load and unload the kayak with the pivoting felt-lined rear saddles that help glide and center a kayak onto the vehicle
- Two independent pivoting saddles with angle-setting lever conforms to limitless range of hull shapes
- Protects the hull with large, flexible, cushioned pads
- Quickly secure the kayak using the center load straps with car-protective buckle bumpers and QuickDraw bow and stern tie-downs
- Fits a variety of Thule rack systems, round bars and most factory racks due to T-Track and FlipFit brackets
- Accommodates kayaks up to 36 in/90 cm wide and 75 lbs/35 kg
- Dimensions (LxWxH) 12 x 19 x 13 cm
- Weight 3.1 kg
Ships to Canada Only
- Easily load and unload the kayak with the pivoting felt-lined rear saddles that help glide and center a kayak onto the vehicle
-
Thule Hullaport
$299.95 CAD
-
High-performance and easy-to-use J-style kayak rack. Ships to Canada Only
-
- Wide mouth J-profile offers easier loading and unloading
- Stable, space-saving design thanks to the angled shape of the kayak rack
- Thick, all-weather pads provide maximum kayak protection
- Powerful straps keep the kayak firmly secured
- Durable, rust-resistant coating and hardware for longer product life
- Thule Buckle Bumper buckle protects the kayak and car from scratches during loading and transport
- Will carry 1 Kayak (up to 36" wide) and up to 75 lbs (34kg)
- Wide mouth J-profile offers easier loading and unloading
-
Specifications Thule Hull-a-Port Dimensions 18" x 6.5" x 16.5"
(45.7 x 16.5 x 41.9 cm)Weight 7lbs 11oz (3.9 kg) Weight Capacity 75 lbs (34kg) Fit - Compatible with Thule SquareBar Evo.
- Adapter required to fit Thule WingBar Evo or Thule AeroBlade crossbars.
Size Capacity 1 Kayak up to 36" wide
Thule Hullaport Aero
$399.95 CAD
– Sold Out-
Innovative kayak carrier that is safe, stylish, easy to use and integrates seamlessly with Thule roof rack systems. Ships to Canada Only