Malone
Malone 25" Rack Pads
$37.95 CAD
-
Extra long 25" Rack Pads extend the protective surface area over the load bars for larger and wider transport requirements. Sold in sets of two.
Combine with our MPG200 series Universal Cross Rail System and MPG307-15 Load Straps for a complete and affordable rooftop carrier system.
-
- Velcro hook & loop closure system for a solid confident fit
- Two shock cords per pad for additional retention strength
- High density foam padding prevents load abrasion
- Water resistant nylon outer sleeve for long life
- Recommended for square, round and factory oval load bars
Malone 30" Rack Pads
$44.95 CAD
-
Racks pads are a simple, safe and effective way to transport watercraft when rooftop load bars are in-place. The Malone 30" standard rack pads are designed for standup paddle boards. Sold in sets of two and provided with a one year warranty to ensure customer satisfaction. -
- Fade resistant polyester construction
- Velcro and shock cord fastening system
- Fits round, square or some factory load bars
-
- Weight: 1 lb
- Length: 30"
- Width: 4"
- Height: 2"
Malone AirFlow2 Cross Rail System
$284.95 CAD
-
The MPG215 AirFlow2 features enhanced strength, improved fit capability and upgraded aerodynamics. Includes integrated towers, pre-installed locks and double walled aluminum rails for a quiet and confident transport.
- Non-corrosive aluminum double wall construction
- Integrated T-slots for easy accessory attachment
- Cam assist bolts ensure a tight fit on small side rails
- Key locking security attachment towers
- Aerodynamic profile to reduce wind noise
- Delivered complete and ready to install
- Simple and quick installation. No tools required
- 165 lb load capacity for confident transport
- Lifetime Warranty
This item is oversized and incurs a $10 surcharge when shipping.
-
- Weight: 10 lb (50") / 13 lb (58")
- Length: 50" / 58"
- Width: 3.5"
- Height: 4.5"
- Load capacity: 165 lb
- What’s In The Box
- (1) Set of 2 Load bars with Towers & Endcaps
- (2) Keys
- (2) Integrated Allen Wrenches
- (2) Tubular Rubber Gaskets
- (1) Instruction Manual
-
- Click HERE to be taken to the Malone website for a fit guide. Simply select your year, make and model of vehicle to see what Malone products will work.
Malone Canoe Kit Standard in Mesh Bag
$55.95 CAD
– Sold Out-
The updated packaging for the MPG187 features an environmentally friendly mesh travel tote that can be continuously reused. These high-end foam kits include everything required to safely and affordably transport one canoe on either a bare roof or with a vehicle equipped with load bars.
The 6" blocks feature a universal cut-out profile that will fit round, square and oval load bars. When used on a bare roof, the padded bottoms provide anti-slip containment and protect the vehicles finish. These blocks also include topside cut-outs that fit over the canoe gunwales for added securement.
Comes with two 15' cam style load straps and safety tie-downs with S-Hooks. Proudly made in the USA with the finest EVA closed cell foam. Product workmanship and material performance is ensured with a One Year Limited Warranty. -
- Four 6" non-skid universal foam blocks fit round, square and factory oval cross rails
- Two heavy duty load straps securely hold the canoe
- Safety tie-downs provide additional transport integrity
- Custom mesh travel bag holds the kit when not in use
Malone Channel Loader Kayak Load Assist Module
$98.95 CAD
-
The Channel Loader™ is an incredibly simple to use kayak loader that works with nearly any vehicle and fits most boat hull configurations. The design includes an extra tall frame that reaches over most spoilers, and a narrow footprint to allow loading of two kayaks on the vehicle's rooftop. Other features include an over-sized 10" wide conical roller to improve boat control and a three-position adjustment system to match any angular loading requirement. The heavy-duty toggle activated vacuum cups have non-marking pads that protect the vehicle's sheet metal from abrasion. Stores in the trunk or hatch when not in use.
Note: For sedan style vehicles, two individual MPG367 Channel Loaders™ are recommended.
-
- V-shaped roller works with most kayaks
- Corrosion resistant construction
- Fits most SUV's, sedans and hatchbacks
- Three position loading adjustment
- Stores in the vehicle when not in use
- Easily installs in seconds
- Lifetime Limited Warranty
- V-shaped roller works with most kayaks
-
- Weight: 3.5 lbs
- Length: 9"
- Width: 16.5"
- Height: 4"
- Load Capacity: 75 lb
Includes: - (1) Extended Frame with V-Roller
- (2) Vacuum Cups
- (1) Vacuum Cup Mounting Hardware
- (1) Instruction Manual
- Weight: 3.5 lbs
Malone Deluxe Kayak Foam Block Kit
$79.95 CAD
– Sold Out-
The updated packaging features an environmentally friendly mesh travel tote that can be continuously reused. These high-end foam kits include everything required to safely and affordably transport one kayak on either a bare roof or with a vehicle equipped with load bars.
The 18" blocks feature a universal cut-out profile that will fit round, square and oval load bars. When used on a bare roof, the padded bottoms provide anti-slip containment and protect the vehicles finish. Includes two 15' cam style load straps, 10' block straps and safety tie-downs with S-Hooks. -
- (2) 18" long foam blocks to transport most kayaks
- (2) 15' load straps for a confident transport
- (2) 10' block straps to capture and prevent side to side movement
- (2) Safety tie-downs to fully ensure a safe installation
- (1) Custom mesh travel bag holds the kit when not in use
- (2) 18" long foam blocks to transport most kayaks
Malone Downloader
$249.95 CAD
– Sold Out-
The DownLoader™ is Malone's premium J-Style carrier with features for low clearance, ease of loading and universal fit for most load bars. These carriers also include corrosion proof frames, molded strap bales, replaceable base pads, replaceable upper sleeves and a new fold-down release design for 2020.
The universal mounting system fits a large cross section of aftermarket load bars (round, square and oval) as well as most factory systems. Also includes two lengths of mounting bolts to achieve the best rack installation. Comes with cam style load straps and bow & stern safety tie-downs.
-
- Fold-down frame for low clearance access
- Boarding ramp for easy loading
- Corrosion resistant aluminum construction
- Oversize foam padding with replaceable acrylic fabric sleeves
- 11' load straps and safety tie-downs
- Jawz2™ universal fit mounting hardware
- 60mm and 70mm mounting bolts
- Compatible with the MPG351-XL Telos™ Load Assist
- Fold-down frame for low clearance access
-
- Weight: 12.2 lb
- Length: 17"
- Width: 6"
- Height: 19.5" (when deployed) - 6" (when folded down)
- Load Capacity: 75 lb
Includes: - (2) DownLoader™ Kayak Carriers
- (1) Jawz2™ Kit with Mounting Hardware
- (2) 11' Cam Buckle Straps
- (2) Bow and Stern Safety Lines
- (1) Instruction Manual
Click here for instruction manual
- Weight: 12.2 lb
Malone Foam Block - Canoe
$7.95 CAD
– Sold OutNot all foam blocks are created equal! These Malone Canoe Blocks have slots on both sides to accommodate the canoe gunwales as well as roof rack crossbars. They also offer...
Malone Foam Block - Kayak
$22.95 CAD
– Sold OutNot all foam blocks are created equal! These 18" wide Malone Kayak Blocks have slots on the bottom to accommodate roof rack crossbars. They also offer a non-skid bottom for...
Malone Foam Block - SUP
$27.95 CAD
– Sold OutNot all foam blocks are created equal! These Malone SUP Blocks have slots on the bottom to accommodate roof rack crossbars. They also offer a non-skid bottom for better performance...
Malone HandiRack Inflatable
$169.95 CAD
– Sold Out-
The world’s first inflatable roof rack is simple to use, installs in minutes, and doesn't require any tools for assembly. Use in the summer or winter (or anytime) to transport your paddleboard, surfboard, kayak, or snowboard. It can also carry cargo but that's not as much fun.
Not suitable for use on vehicles that are fitted with side curtain airbags.
-
- Stores in the Trunk When Not In Use
- Universal Fit; Works with nearly all vehicles but not suited for use on vehicles fitted with side curtain airbags
- Simple To Use; Installs In Minutes
- Reinforced nylon stitching and D-Ring anchors
- Comes with travel bag, load straps and air pump
- One Year Warranty
-
- Weight Capacity:- 180 lbs
- Dimensions when inflated: 38" (length) x 9.5" (width) x 3.5" (height)
- Materials: 420 Denier Nylon with 5 D-Ring Anchor Points
- Air Pump: 1000cc Double Action
Malone Hood Loop Straps
$10.95 CAD
Fasten these loops of webbing to a bolt under your hood to create a secure place to connect your front tie downs. Just fold them under the hood when not...
Malone J-Cradle
$129.95 CAD
– Sold Out-
The J-Cradle is a basic, affordable J-style carrier. This cradle offers a rock solid carrier system for the discerning customer who demands a high quality product but has a limited budget.
The steel tubular frames provide maximum strength and holding power for long road trips and large kayaks. For rust protection, there's three layers of corrosion resistant coating that ensure years of continued transport service.
Each carrier has adjustable rear foam padding for great boat protection and a felt pad on the base.
Furnished with all hardware, cam buckle load straps and bow & stern safety tie-downs for one kayak.
-
- Tubular steel frame for maximum transport strength
- Three layers of corrosion resistant coating
- "No tools required" mounting hardware
- Adjustable rear padding for great boat protection
- Universal fit hardware for round, square and factory oval load bars
- Lifetime warranty
-
- Capacity: For kayaks up to 34" wide and 75 LB
- Dimensions: 16" (L) x 6" (W) x 16.5" (H)
- Frame: Coated steel, Injection molded nylon
- Weight: 12 LB (set of 2)
Malone J-Hoops Kayak Storage
$56.95 CAD
– Sold Out-
The J-Hoop is a medium capacity wall storage system that safely holds most sit-inside and sit-on-top kayaks. The 1.00" round steel tubing is powder coated for rust prevention and covered with a thick layer of foam to protect the boat. Includes mounting hardware.
-
- 1" round powder coated steel tubing
- Fully padded frame
- Nine fastener attachment system
- Lifetime warranty
-
- Load Capacity: 150 lb
- Dimensions: 16" (length) x 1" (diameter)
- What’s In The Box:
- (2) J-Hoop Arms
- (1) Hardware Kit
- (2) Wall Couplers
- (1) Instruction Manual
Malone J-Pro 2
$169.95 CAD
– Sold Out-
The J-Pro2 is Malone's upgraded J-Cradle carrier with enhanced foam padding and acrylic sleeves to better protect the kayak. Fits most sit-inside and sit-on-top kayaks. This mid-priced carrier features a silver finish with multiple layers of corrosion resistant coating and universal fit hardware. Includes Lifetime Limited Warranty.
-
- Silver coated corrosion resistant protective finish
- Molded base plates and stainless steel rivets
- Full length acrylic covered rear foam pads (replaceable)
- 11' load straps and safety tie-downs
- Jawz universal mounting hardware for most rack styles
- 60mm and 70mm mounting bolts (Note: Longer bolts available in Accessories)
- Fits aluminum T-style car and truck racks (Note: Hardware available in Accessories)
- Assembled in the USA
- Lifetime Limited Warranty
- Silver coated corrosion resistant protective finish
-
- Weight: 11.5 lb
- Length: 16"
- Width: 6"
- Height: 16.5"
- Load capacity: 75 lb
- Weight: 11.5 lb
Malone Kayak Hammock DLX Hoist
$84.95 CAD
Overhead storage delivered in a "simple to install" package. The Kayak Hammock features independent pulley control, self locking brake and steel construction that creates a dependable two point hoist system....
Malone Paddle Board Kit DLX
$106.95 CAD
-
The Deluxe Paddleboard Kit is an economic entry level system that works with or without vehicle cross bars. The oversized rooftop blocks can handle any size of SUP or surfboard currently on the market. Each block features a non-slip TPR bottom that works great on a bare roof.
The set also includes two 22" spacer pads which allow two boards to be transported safely without damage. Simply place the pads between the boards and tighten with the 15' heavy duty load straps.
Each set comes complete with a reusable tote bag and step by step instructions.
-
- 24" oversize rooftop blocks with non-slip bottoms
- 22" spacer pads that protect the boards when stacking
- Profiled to fit round, square and factory oval roof racks
- UV resistant construction for long life
- 15' heavy duty load straps with cam buckles & buckle protectors
- Reusable plastic tote bag
- One year warranty
-
- Capacity: 70 LB (32kg)
- Weight: 2.75 LB (4.2 kg)
- Block Dimensions: 24"(length) x 4.75"(width) x 4"(height)
Malone Quick Lash T-Hood Loop
$29.95 CAD
– Sold OutThese T-Style Hood Loops are designed to work under the hood, or, with the deepest rear hatches. Eliminates the need for finding vehicle frame tie-down points. Polypropylene and injection molded...
Malone SeaWing
$209.95 CAD
– Sold Out-
The SeaWing™ combines single saddle design and mid-point mounting to aid quick set-up and provide extra roof space. The low profile of the SeaWing will flex to gently cradle your boat and improve gas mileage -
- Only bottom down carrier in the market that allows roof space to transport two kayaks because of the mid-point mounting system
- Single cradle design provides easier set-up by eliminating the need to individually adjust each saddle in a four point carrier
- Gentle flex protects kayak at all times
- Universal Fit JAWZ Mounting Hardware works with Round, Square and Most Factory Oval Cross Rails
- Can assemble or transfer to another vehicle in minutes with "No Tools Required"
- Corrosion Free and UV Resistant
- Cam Style Load Straps with Buckle Protectors
- 50mm and 60mm Pre-coated mounting bolts (larger bolts available for purchase if needed)
- Economical to add Stinger Load Assist Module (also sold as a Combo package) that facilitates single person loading and eliminates contact between kayak and vehicle
Malone SeaWing/Stinger Combo
$323.95 CAD
– Sold Out-
The SeaWing™ Stinger™ Combo is the most versatile and affordable carrier / loader system available in the market today. It doesn't get any easier than this to get out and enjoy your kayak. -
- Sliding padded V-block extends 22" behind the carrier to secure, align and hold the kayak in place during loading
- Padded frame protects kayak and vehicle and eliminates any contact during loading
- Loading frame easily retracts back under carrier during transport
- Combo system has all the bottom down carrier features of the SeaWing including roof space for transporting two kayaks
- Universal Fit JAWZ Mounting Hardware works with Round, Square and Most Factory Oval Cross Rails
- Can assemble or transfer to another vehicle in minutes with "No Tools Required"
- Corrosion Free and UV Resistant
- Cam Style Load Straps with Buckle Protectors
- 70mm Pre-coated mounting bolts (larger bolts available for purchase if needed)
-
- Capacity: 70 lb / 32" Wide Kayak
- Dimensions: 27.5"(length) x 6"(width) x 4.5"(height)
- Frame: Corrosion Proof Polycarbon
- Padding: Ribbed Synthetic Rubber
Malone Sentry Ratchet Tie Downs
$44.95 CAD
-
The MPG316 Sentry™ Ratchet Tie-Down is Malone's premium safety bow & stern line system. Secure your boat quickly and easily with no time consuming knots to deal with. Bow & Stern safety tie-down is a basic safety requirement for transporting kayaks and should be used in all circumstances with all carriers. -
- Ratchets allow you to quickly and easily secure your boat to your vehicle
- Two tie-downs per set will secure one boat.
- Includes everything needed to secure one boat
Malone Stax Pro 2
$199.95 CAD
– Sold Out-
The Stax Pro2 is the combination of intelligent design, excellent workmanship, superior strength and affordable pricing. This two boat transport system delivers a safe and secure trip to the water and back and assures a great paddling experience. Features a fold-down frame design for low clearance and foam blocks to protect the kayaks from cross bar abrasion. Comes with all required straps, mounting hardware and safety lines to safely transport two kayaks.
Note: The base of the carrier has a rectangular "cutout" that has been included for square cross bar fit. This "cutout" does not effect the fit or function of the carriers when installed to round or oval shaped cross bars.
Note: All Malone carriers come with two lengths of installation hardware (hex bolts). Cross bars can vary in thickness and having two lengths to choose from allows the consumer to select the best fit for their application. We recommend that the unused set of hardware be retained for future use with a different vehicle or cross bars. -
- Open gate head design easily and securely captures load straps
- Universal fit mounting hardware
- 50mm and 60mm mounting bolts (Note: Longer bolts available in Accessories / Hardware & Mounting Kits)
- Cam style load straps and 10' safety tie-downs
- Fold-down design for low clearance needs
- Foam stacker blocks to protect the kayaks
- Octagonal aluminum post construction
- Corrosion resistant molded components
- Made in the USA
- Lifetime Limited Warranty
- 5"x 5" x 20" high
Malone Stinger Load Module
$147.95 CAD
– Sold Out-
The Stinger™ permanently attaches to the MPG107 SeaWing™ to create the most versatile bottom down carrier / loader combination in the industry. This system makes loading and transporting a kayak simple and easy for one person. -
- Sliding V-block Frame Extends 22" To Capture and align the Kayak for loading and then Retracts For Transport
- Padded Frame Will Never Scratch the Kayak or the Vehicle
- Corrosion Free and UV Resistant
- Furnished with 70mm pre-coated mounting bolts
- Integrated Design that Permanently Attaches to the MPG107M SeaWing™ (Sold Separately)
-
- Capacity: 70 lb kayak
- Dimensions: 25" (length) x 8" (width) x 4" (height)
- Frame: Corrosion Free Polycarbon
- Padding: Ribbed Synthetic Rubber
Malone SUP-Port Wall Mount
$56.95 CAD
-
The MPG347 SUP~Port safely stores a single SUP or surfboard with minimal standoff space from the wall. Fully padded. Nine point fastening system. Easily installs in minutes. Includes all required hardware. -
- 1" round powder coated steel tubing
- Fully padded frame
- Nine fastener attachment system
- Lifetime Warranty
-
- Load Capacity: 150 lb
- Dimensions: 11" (length) x 1" (diameter)
- What’s In The Box:
- (2) Sup Port Arms
- (1) Hardware Kit
- (1) Instruction Manual
Malone T-Slot Integration Hardware Kit - Aero-Style Crossbars
$29.95 CAD
– Sold Out-
MPG6604 T-slot Mounting Kit replaces the standard MPG300 series mounting kits that contain Jawz, T-knobs and M8 mounting bolts. The MPG6604 utilizes the T-slot in all Malone aero bars and most aftermarket aluminum load bars with T-slots.
Provides a seamless look to the carrier installation and allows more under bar clearance. Fits MPG114 Downloader, MPG116 J-Pro, MPG117 J-Pro 2 and MPG118 J-Loader. Sold in sets of four. -
- T-slot hardware kit fits all Malone Aero Bars and most aftermarket aluminum bars with top side T-slots
- Includes a custom hex wrench for quick installation of this upgraded fit kit
- Fits the MPG114, MPG116, MPG117, MPG118 Malone carriers
-
- M8 fine thread bolts
- Custom designed T-slot nuts
- Electroplated hardware for corrosion resistance.
- What’s In The Box:
- (1) Set of Four, T-Slot Nuts
- (1) Set of Four, M8 Bolts
- (1) Allen Wrench
- (1) Installation Card
Malone T-Slot Integration Hardware Kit - Truck Racks
$42.95 CAD
-
MPG8287 T-slot Mounting Kit replaces the standard MPG300 series mounting kits that contain Jawz, T-knobs and M8 mounting bolts. The MPG8287 utilizes the T-slot in most aftermarket aluminum truck racks with top side T-slots.
Provides a seamless look to the carrier installation and allows more under bar clearance. Fits the MPG114 Downloader, MPG116 J-Pro, MPG117 J-Pro 2 and MPG118 J-Loader. Sold in sets of four. -
- T-slot hardware kit fits most aftermarket aluminum truck racks with top side T-slots
- Includes a custom hex wrench for quick installation of this upgraded fit kit
- Fits the MPG114, MPG116, MPG117 and MPG118 Malone carriers
-
- M8 fine thread bolts
- Custom designed T-slot nuts
- Electroplated hardware for corrosion resistance.
- What’s In The Box:
- (1) Set of Four, T-Slot Nuts
- (1) Set of Four, M8 Bolts
- (1) Allen Wrench
- (1) Installation Card
Malone Telos XL Load Assist Module
$569.95 CAD
– Sold Out-
The Telos™XL temporarily attaches to J-style carriers (DownLoader™ - J-Loader™ - AutoLoader™) and the SeaWing™ V-style carriers. This lift assist provides a safe way to vertically raise the kayak into a position where it can easily be loaded into the carriers. You can detach the Telos™ XL and use it on the other side of the vehicle to load your second kayak, or, store it in the trunk for unloading later. The new ground level adjustable extensions totally avoid contact with the vehicle's sheet metal. There is simply no other load assist on the market with this versatility or value. Comes with assembly tools, instructions and Malone Lifetime Limited Warranty.
This item is oversized and incurs a $10 surcharge when shipping.
-
- Self-locking vertical ratchets for ensured safety
- Adjustable bottom extensions with pivoting feet
- Fully padded steel cradles help protect the kayak
- Quick release detachment system to load a 2nd kayak
- Sized to conveniently store in the trunk
- Made in the USA
- Lifetime Limited Warranty
-
- Weight: 19 lb
- Length (Extended): 98.25"
- Length (Retracted): 58.75"
- Width: 6"
- Load Capacity: 75 lb
Malone VersaRail Bare Roof Cross Rail System
$229.95 CAD
-
The VersaRail™ instantly transforms a bare roof into a functional and stable platform. Transport bikes, boats & storage systems, as well as, oversized loads from the hardware store. Includes twin cup vacuum towers, 1.5" attachment straps and a Five Year Limited Warranty.
This item is oversized and incurs a $10 surcharge when shipping.
-
- No additional tools required (wrench provided)
- Corrosion resistant load bar coating
- Square shape fits most rack accessories
- Non-marking silicon pads
- 1.5" wide safety attachment straps
- Installs in minutes
- No additional tools required (wrench provided)
-
- Length: 50" or 58"
- Width: 8"
- Height: 5.75"
- Load capacity: 135 lb
- Length: 50" or 58"