Yakima
Yakima Baseclip
$84.95 CAD
Tailor your towers – these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car’s naked roof. Note:...
Yakima Baseline 2-pack
$191.95 CAD
-
No rails? No problem. The versatile BaseLine’s intelligent design and advanced adjust ability help it morph to the shape of your car’s roof for a sleek, secure, load-it-up fit.
-
- Secure, easy-to-use tower specifically designed for cars without roof rails or gutters
- Advanced tower architecture is sleek, strong and quiet
- Works with JetStream, CoreBar and RoundBar crossbars
- Tri-axial DropHook™ clip adjustment easily adjusts to a wide range of roof shapes for safe, secure hold
- BarBed™ has 12° of pitch adjustment to optimize tower position and level bars on rounded roofs
- Super-simple installation – tool included
- Maximum load rating of 165lbs (75kg), depending on vehicle and bar rating
- Easily locks to you vehicle with our SKS system (sold separately)
- RoundBar SL Adapter required to use Yakima's classic RoundBar with StreamLine System Towers (sold separately)
-
FAQ:
Fits for every car? Yakima tries its best to rack every car, but that is not always possible. Sometimes they find that there is no way to fit a particular vehicle.
Can I use my Q-Clips with the new BaseLine Towers? The Baseline towers use a whole new clip system called Baseline Clips. Much like Q-Towers, these have vehicle-specific fits and can be found by entering your vehicle information in Yakima's fit data base.
Can I still use my Round Bars with your new towers? Absolutely. You will need to purchase the Round Bar Adapter.
Yakima Baseline 4-pack
$327.95 CAD
-
No rails? No problem. The versatile BaseLine’s intelligent design and advanced adjust ability help it morph to the shape of your car’s roof for a sleek, secure, load-it-up fit.
-
- Secure, easy-to-use tower specifically designed for cars without roof rails or gutters
- Advanced tower architecture is sleek, strong and quiet
- Works with JetStream, CoreBar and RoundBar crossbars
- Tri-axial DropHook™ clip adjustment easily adjusts to a wide range of roof shapes for safe, secure hold
- BarBed™ has 12° of pitch adjustment to optimize tower position and level bars on rounded roofs
- Super-simple installation – tool included
- Maximum load rating of 165lbs (75kg), depending on vehicle and bar rating
- Easily locks to you vehicle with our SKS system (sold separately)
- RoundBar SL Adapter required to use Yakima's classic RoundBar with StreamLine System Towers (sold separately)
-
FAQ:
Fits for every car? Yakima tries its best to rack every car, but that is not always possible. Sometimes they find that there is no way to fit a particular vehicle.
Can I use my Q-Clips with the new BaseLine Towers? The Baseline towers use a whole new clip system called Baseline Clips. Much like Q-Towers, these have vehicle-specific fits and can be found by entering your vehicle information in Yakima's fit data base.
Can I still use my Round Bars with your new towers? Absolutely. You will need to purchase the Round Bar Adapter.
Yakima BigCatch
$379.95 CAD
– Sold Out-
Bust out the big boats with the BigCatch’s whopping 150-lb. capacity. Introducing the first universal kayak saddle built to handle heavy fishing kayaks and sit-on-tops. The rubber-padded saddles conform to the kayak’s hull for a super-secure, full-contact carry that’s easy on your boat. A simple, tool-free install will load it up faster for even more time to chase the next big catch.
-
-
Specially designed to support the extra weight of fishing and sit-on-top kayaks
- Handles up to 150 lbs.—enough for the heaviest kayaks
- Oversized cradle protects the boat and conforms to a variety of hull shapes
- Soft rubber pads protect the kayak from dings and scratches
- Felt pads for easy kayak loading
- Universal mounting hardware fits our StreamLine, RoundBars and HD
- Bars—along with most other crossbars
- Easy, tool-free installation to quickly mount, load and go
- Heavy-Duty Straps and Bow and Stern Tie-Downs included
- RoundBar Kit (sold separately) prevents BigCatch saddles from rotating on RoundBars
- SmarT-Slot Kit 4 (sold separately) for use with T-slot crossbars
- Weight: 8.40 lbs
- Dimensions: L 6.25in x W 9.00in x H 5.00in
-
Specially designed to support the extra weight of fishing and sit-on-top kayaks
Yakima BoatLoader Evo
$214.95 CAD
– Sold Out-
An easy way to make load up less of a chore, the BoatLoader EVO telescopes out 28" from your roof rack to help get canoes, kayaks, and boards up to the roof. When not in use, it stows neatly inside your RoundBar or CoreBar crossbar, ready and waiting for the next trip to the water. It's easier on your back, your boat and your car's paint job. -
- Telescoping boat load-assist arm helps you easily get big boats and boards up to your roof
- Protects kayaks, canoes, and your car from dings, scratches and dents
- Extends 28" from end of bar for superior clearance and ease of use
- Retracts into the bar for instant storage
- Corrosion-resistant material provides years of rugged use
- Fits Yakima CoreBar and RoundBar crossbars only
- Weight: 5.54 lbs
- Dimensions: L 36.50in x W 3.80in x H 3.30in
- Boatloader, boat loader, canoe, kayak, SUP, board
Yakima Corebar - Pair
$269.95 CAD
-
Combining modern aerodynamics with old-school muscle, the new CoreBar is the first aero bar built with roll-formed steel’s strength, utility and durability. The JetFlow™ design is wind-tunnel tested to reduce drag for less wind noise and better fuel economy, and the galvanized steel delivers proven load-bearing performance. -
- Wind tunnel tested JetFlow™ teardrop shape is strong, quiet and exceptionally aerodynamic
- Roll-formed galvanized steel holds the load
- Sleek aerodynamic design looks awesome on your car’s roof
- Vinyl wrapped for durability and corrosion resistance
- Compatible with all StreamLine System Towers
- Comes with 2 Crossbars and 4 Endcaps
- Available in 4 sizes: 50”, 60”, 70”, and 80”
Yakima Corebar - Single
$174.95 CAD
-
Combining modern aerodynamics with old-school muscle, the new CoreBar is the first aero bar built with roll-formed steel’s strength, utility and durability. The JetFlow™ design is wind-tunnel tested to reduce drag for less wind noise and better fuel economy, and the galvanized steel delivers proven load-bearing performance.
***Please Note: This bar is sold individually and may come without a box. It is also available in pairs.***
-
- Wind tunnel tested JetFlow™ teardrop shape is strong, quiet and exceptionally aerodynamic
- Roll-formed galvanized steel holds the load
- Sleek aerodynamic design looks awesome on your car’s roof
- Vinyl wrapped for durability and corrosion resistance
- Compatible with all StreamLine System Towers
- Comes with 2 Crossbars and 4 Endcaps
- Available in 4 sizes: 50”, 60”, 70”, and 80”
Yakima Deckhand with Straps
$207.95 CAD
-
Impressively simple and easy to load, the DeckHand’s felt-padded saddles conform to your kayak’s hull for a super-secure, full-contact carry that’s easy on your boat. Sold in pairs, it partners awesomely with the new HandRoll rollers or another pair of saddles for a custom set-up. Tool free installation makes it a breeze to attach, SKS Lock Core capability lets you lock your boat to your roof rack for added security, and the universal mount fits just about any roof rack. -
- Includes one set of mounts– combine with HandRoll or an additional
- DeckHand to complete the set
- Felt-padding provides easy loading and excellent boat protection
- Oversized cradle protects the boat and conforms to a variety of hull shapes
- Universal mounting hardware fits most roof racks
- Easy tool-free installation lets you quickly mount, load and go
- Locks to roof rack with SKS Lock Cores (sold separately)
- Includes Heavy-Duty Straps and Bow/Stern Tie-Downs
- Weight: 3.50 lbs
- Dimensions: L 7.50” x W 8.00” x H 9.00”
Yakima End Caps (4)
$29.95 CAD
– Sold OutSpare end caps for Yakima round bars
Yakima EvenKeel Boat Saddles
$282.95 CAD
– Sold Out-
Everyone at the river will envy your ingenuity and thrifty selection of the saddle-style rooftop EvenKeel. Universal mounts fit nearly any crossbar right out of the box. And out of the box it comes with everything you need to haul your boat, including straps and bow/stern tie-downs. Sold in a set of 4. -
- Comes with 4 saddles per package – all you need to transport your boat in one box
- Universal built-in hardware fits round, square, factory and aerodynamic crossbars right out of the box. Optimized for aerodynamic bars.
- Innovative HullFlex™ design conforms to your boat for unbeatable hull protection
- Best-in-class value (comes with straps and bow/stern tie downs)
- Optional security bolts included
- Carries 1 boat
Yakima Handroll with Straps
$207.95 CAD
-
Designed to help you easily get any type of kayak up on your roof, the HandRoll’s rubber rollers provide load assist with grip, stability, and protection. The bases pivot to automatically fit the shape of your boat, then lock tight to cradle it while traveling. The universal mount fits most roof racks – no tools needed, and heavy-duty straps and tie-downs are included to keep things secure. -
- Sold in pairs – combine with HandRoll or an additional DeckHand to complete the set
- Large rubber rollers provide a built-in load assist to help guide your boat into place
- Durable rubber pivoting rollers adjust to boat shape for secure loading
- Roller pivot design automatically adjusts to boat’s shape for a secure hold
- Universal mounting hardware fits most roof racks
- Easy tool-free installation lets you quickly mount, load and go
- Locks to roof rack with SKS Lock Cores (sold separately)
- Includes Heavy-Duty Straps and Bow/Stern Tie-Downs
- Weight: 4.00 lbs
- Dimensions: L 10.00” x W 4.25” x H 7.25”
Yakima Jaylow
$331.95 CAD
-
Versatile, adaptable, and super low-maintenance, the JayLow provides maximum loading and minimal fuss. Carry one boat in cradle position, or two boats in stacker position. -
- Carry 1 boat in J-cradle position or 2 boats in vertical, stacker position
- Fully assembled out of the box
- Tool-free installation
- Fits Yakima round, square, factory, or aerodynamic bars
- Adjust the upright position with the easy-to-use integrated cam lever
- Folds flat when not in use
- Includes Heavy-Duty Straps and Bow/Stern Tie-Downs
- SKS Locks sold separately
- Supports one boat up to 80 lb or two boats with combined weight of 110 lbs or less
- Minimum crossbar spreads of 24” or more
- Weight: 11.00 lbs
- Dimensions: L 6.69” x W 6.00” x H 20.00”
Yakima Jetstream
$344.95 CAD
-
Step up to the completely new Yakima bar. Thoroughly wind tunnel tested, the JetStream’s JetFlow design is exceptionally aerodynamic, incredibly strong, lightweight, and really quiet on the move. The root of a modern rack system, it carries a lot and looks good doing it. -
- Wind tunnel tested JetFlow™ teardrop shape is strong, quiet and exceptionally aerodynamic
- Seamless extruded aluminum construction is light, strong and sleek
- JetTruss™ internal support engineering adds serious strength for minimal weight
- T-slot with SmartFill™ push-down infill for easy mount attachment and efficient airflow
- Clear anodized alloy finish and high-gloss polymer end caps look awesome on your roof
- Comes with 2 Crossbars and 4 Endcaps
- Available in 3 sizes: 50”, 60”, and 70”
- Available in Black and Silver
Yakima Keelover
$259.95 CAD
-
The KeelOver attaches directly to any roof rack for a quick, tool-free assembly, right out of the box. Not only will your canoe arrive to the water safely, but you’ll get to spend more time on the water, making for many happy paddlers. -
- Universal design attaches to round, square, aerodynamic and factory bars with a single tightening knob
- Includes canoe securing straps and bow / stern tie-downs ensuring you have everything needed for a single canoe
- Durable over-molded rubber cushions the canoe gunwale while providing stability
- Simple, tool-fee installation and assembly within minutes of opening the box
- Dual bolts included to ensure an integrated fit to vehicle
- Rubber padding protects your crossbars from damage or corrosion
Yakima Landing Pad
$74.95 CAD
-
If you have a vehicle with factory racks or rails, the Landing Pads are the foundation to start with. Pair with versatile Control Towers to make easy and secure tower system. Each Landing Pad is custom made to fit the exact make and model of your car.
- Landing pad 1 shown.
-
- Designed to fit with Control Tower system for the easiest on/off roof rack in the industry
- Each pad sold in a set of 2 (Landing Pad 13, 18 & 22 sold in a set of 4)
- Configure your vehicle and find out which Landing Pads fit your car
- Includes a snap-on cover when not in use
-
Q: What else is needed to complete a basic rack set up? A: You will need two pairs of Landing Pads, a set of Control Towers and one pair of crossbars. Check the fit list to see if there is a Control Tower option for your vehicle.
Q: Will Landing Pads work with Locking RailRiders, or other Yakima Towers? A: Landing Pads will integrate with Control Towers only.
Q: How much can I carry? A: This varies by vehicle, load type and crossbar length. Check the fit list to find out what load types (bikes, skis, boats, etc.) and weight capacity applies to your car.
Q: How can I be sure the system is installed correctly? A: There is no substitute for following all instructions. You can download instructions on the main product page.
Q: Will it damage my car? A: We take fitting cars very seriously, and do everything we can to minimize any effect our rack may have on your cars. However, anything coming into contact with a car’s finish, including our racks, will have some effect over time, and some cars are more prone to these issues than others. So where the possibility of such issues is predictable, we make note of that in the Fit List. When the rack will not be in use for an extended period, it is a good idea to take the rack off of the car. You can also do a lot for yourself by: (1) Following all instructions for installation and usage, and (2) avoiding situations, such as car washes, where the rack may be impacted.
Yakima Longarm
$399.95 CAD
– Sold Out-
The LongArm truck bed extender easily extends the length of any truck bed up to 4 feet. Light and strong, the aluminum hitch mounted rack is the ideal solution for hauling fishing kayaks, boards, lumber, ladders and more. Adjustable to three distinct load-carrying positions and rated to carry up to 300 pounds in lower positions, the LongArm takes your truck bed to the next level. -
- Provides 4 feet of additional truck bed length with a 60” wide crossbar
- Adjustable to three load-carrying positions:
- Bed height for use when your truck tailgate is open (300 lb carrying capacity)
- Bed rail height for use with Yakima's BedRock rack system or a tonneau cover (300 lb carrying capacity)
- Truck cab height by combining theLong Arm Extension with a roof rack system (165 lb carrying capacity) (sold separately)
- Installs easily and securely to any 2” hitch receiver using the included 5/8” threaded hitch bolt Aluminum construction engineered for strength – weighs only 12 lbs!
- Integrated tie-down points ensure a secure ride for your fishing kayak, canoe, ladders, lumber and more
- Add any Yakima boat mount to the crossbar for added boat protection.
- Yakima signature bottle opener lets you enjoy a post-paddle cold one
- Durable black powder-coat finish
- Add the LongArm Pad for increased load protection (sold separately)
- Add the LongArm Height Extension up to cab height (sold separately).
- Heights from the top of the tongue to the top of the crossbar at the four angle positions (Vertical to Horizontal):
- Low Bar Heights - 40 in, 37 in, 27 1/2 in, 14 1/4 in
- Mid Bar Heights- 41 3/8 in, 38 1/4 in, 28 in, 15 1/4 in
- High Bar Heights- 42 3/4 in, 39 1/2 in, 29 in, 15 3/4 in
Yakima Longarm Extender
$139.95 CAD
-
The LongArm Height Extension takes your LongArm truck bed extender to the next level. It securely attaches to the LongArm when it’s in the vertical position and easily adjusts to match the height of your cab’s roof rack. The 165 lb capacity allows for a couple of kayaks or ladders to go up high on your truck, leaving room in your truck bed for other gear, and the included anchor strap tie downs ensure the load is secure. -
- Extends your LongArm truck bed extender up to cab height to carry longer loads up to 165 lb
- Fully adjustable in height to match your cab’s roof rack perfectly
- Maintains truck bed space for other gear while still enabling longer loads to be carried such as a fishing kayak, canoe, ladders, lumber and more
- Aluminum construction engineered for strength
- Durable black powder-coat finish
- Included anchor straps secure the LongArm, preventing side to side movement
- Weight: 3.00 lbs
- Dimensions: L 2.50in x W 2.00in x H 28.25in
Yakima MightyMount 39H
$55.95 CAD
– Sold Out-
MM39H is used to adapt older mounts to JetStream bars. Sold as a four pack. -
- Durable and flexible nylon adapters designed specifically for CORE and JETSTREAM crossbar shapes
- Allows most RoundBar style mounts to attach in minutes
- Tool free installation
- Sold as a set of 4
- Compatible with HighRoller, Raptor, WheelFork, HullyRollers, Mako Saddles, KayakStacker, Multimount, Accessory Lock Housing, and Basketcase
Yakima Outdoorsman 300 FS
$374.95 CAD
-
The versatile, no-drill Outdoorsman lets you create a top-of-vehicle truck rack system for your full-size pickup truck—without the need for a camper shell—while leaving you full access to the truck bed.
This item is oversized and incurs a $10 surcharge when shipping.
-
- This easily-installed truck rack system clamps onto truck bed rails without any drilling
- Compatible with all Yakima accessories for multi-sport adventures
- Best for mid to full-size truck beds. If you need a truck rack system for a compact truck, see the Outdoorsman 300 Compact
- Combine with round bars (sold separately) to perfectly match truck width
- Heavy-duty construction handles up to 300 lbs.
- Comes with 2 towers per package
-
Q: What size crossbar can I use? A: The minimum size is 58", but you can also use 66" or 78" bars.
Q: Does it come with protection for bed rail? A: Yes. Pads are included.
Q: Do I need any tools? A: Yes, a 3/4" wrench.
Q: My bedliner covers the entire rail, can I still use the Outdoorsman? A: Yes, but you may need to cut away a section of the liner on the underside of the bedrail. Installing the anchor with liner material interfering can cause the brackets and load to fall away from the vehicle!
Q: My pickup has flared sides, can I still use the Outdoorsman? A: Possibly. Examine the bed. If a strong metal bed lip with no obstructions is present, it should work fine.
Yakima Q Clips
$64.95 CAD
No Q Tower is complete without custom fitted Q Clips. Sleek stainless steel minimizes interference with your door seal, while the custom fit and accompanying base pad connect securely to...
Yakima Ridgeline 4-pack
$327.95 CAD
– Sold Out-
Take sleek to a new level – the ingenious RidgeLine Towers integrate with flush-mount factory side rails so you can build a real rack that carries more. Strong and versatile, they attach easily and have a sleek design that aligns with your vehicle’s aerodynamic attitude.
-
- Attaches a base rack system to vehicles with flush-mount factory side rails
- Advanced design is strong and quiet and aligns with aerodynamic vehicle aesthetics
- Works with JetStream, CoreBar and RoundBar crossbars
- Unique clip design adapts to your rails for a secure, accurate fit
- BarBed™ has 12° of pitch adjustment to optimize tower position and level bars
- Super-simple installation – tool included
- Maximum load rating of 165lbs (75kg), depending on vehicle and bar rating
- Easily locks to you vehicle with our SKS system (sold separately)
- RoundBar SL Adapter required to use Yakima's classic RoundBar with StreamLine System Towers (sold separately)
-
FAQ:
Fits for every car? Yakima tries its best to rack every car, but that is not always possible. Sometimes they find that there is no way to fit a particular vehicle.
Can I still use my Round Bars with your new towers? Absolutely. You will need to purchase the Round Bar Adapter.
Yakima Roundbar SL Adapter
$55.95 CAD
– Sold OutBar adapter that allows you to run RoundBar on StreamLine Towers.
Yakima Roundbars Pair
$174.95 CAD
-
Crossbars attach to towers, provide stability to your roof rack, and support the sport-specific mounts that carry your gear. The width of your crossbars also determines how much stuff you can carry.
This item is oversized and incurs a $10 surcharge when shipping.
-
- Round crossbars made from vinyl coated galvanized steel
- Includes 2 crossbars
- End Caps included in Yakima Base Rack Systems or can be purchased separately
- Crossbars are available in 48”, 56", 66”, 78” and 86" widths
Yakima SKS Accessory Lock Housing
$34.95 CAD
-
Make just about any accessory lockable with an SKS accessory housing. Use with bike, boat or BasketCase accessories that don’t accept SKS lock cores. SKS lock cores sold separately. -
- Lock rack accessories to your vehicle's crossbar
- Use with bike, boat, and BasketCase accessories
- SKS Lock Cores sold separately
Yakima SKS Lock Cores
$59.95 CAD
-
SKS stands for “same key system.” These cores enable you to lock all of your yakima products with just one key. -
- Fits all lockable accessories
- 2 keys included plus a control key
- Available in a 2-pack, 4-pack, and 6-pack option
-
Q: Why don’t lock cores come with all products? A: It is the only way to have one key for the entire system. Let’s say you bought a Q-tower system and two bike mounts. If the cores came with each product, then the cores would not match and you would have 3 different keys for the rack. Add another accessory, add another key to your ring. Instead, a 6 pack of lock cores will lock the set of towers and both bike mounts and keep everything on the same key. Having the locks separate also gives you an option. If you don’t want them, you have the option of not purchasing them, or they can be added on later.
Q: Can I get more locks that match my current key number? A: If your key/lock number starts with the letter "A” then you can. If the number starts with a number or any other letter, that means they are older, pre-SKS locks, and cannot be matched. SKS locks can be special ordered by your local dealer, or call us at (888) 925-4621.
Q: I lost my key, how can I get another? A: If you know your key number, your dealer can order replacements for you, or you can contact us directly at (888) 925-4621 (M-F, 8 a.m. - 5 p.m., PST). If you do not know your key number, but you did send in your key club registration, we can look it up for you. Still not the answer for your situation? Well, if your locks were produced after 1992, and your key number is still a mystery, it can be found on the side or back of the lock "core" itself. Accessing it will require a locksmith to pick one lock, and a control key (the "gold blank" key that comes with every set of locks) to remove the core from the housing. Once the lock core is out, you can read the number and order new keys.
Q: How long has the SKS system been around? A: The Same Key System started in 1993.
Q: Are SKS locks theft proof? A: Sorry, but no. Given enough time and the right tools a thief will get what he wants. SKS is a very good, easy to use, theft deterrent, but nothing is really theft proof. Our advice is to remove gear when you are not transporting it. Some personal property insurance policies may cover theft, but check with an insurance agent before hand, to be sure.
Yakima Skyline 2-pack
$191.95 CAD
-
Roll your own way – the SkyLine Towers work with the LandingPads to create a customizable, mega-versatile, super easy-to-use system that easily handles your unique personality and extensive range of gear. -
- Secure and simple – may be the easiest-to-use rack system out there
- Fits all styles of Landing Pad (required)
- Advanced tower architecture is sleek, strong and quiet
- Works with JetStream, CoreBar and RoundBar crossbars
- BarBed™ has 12° of pitch adjustment to optimize tower position and level bars on roofs with curv