+Brands
- All Products
- 49th Parallel
- Acorn
- Adventure Medical Kits
- Adventure Technology
- AlpineAire
- Aqua Lung
- Aqua Sphere
- Aquabound
- AquaFusion
- Aquatabs
- Arcade Belts
- Astral
- Atlas
- Backcountry Coffee Company
- Backpacker's Pantry
- Backroad Mapbooks
- Badger
- Baffin
- Ben's
- Bending Branches
- Big Agnes
- Bison Designs
- BluWave
- Bogs
- Boissinot Pharma
- Bomber Gear
- Bruce Trail Conservancy
- Brunton
- BUFF
- Bushnell
- Byer of Maine
- Cablz
- Camelbak
- Carlisle
- Chaco
- Chaos
- Chinook
- Chrismar
- Chums
- Coghlan's
- Counter Assault
- CTR
- Cypher
- Darn Tough
- Delta
- Dish & Duer
- Dr. Scholl's
- E-Case
- Eagle Creek
- Eno
- Esbit
- Eureka
- Ex Officio
- Faber
- Fig
- Firefly Books Ltd.
- Fjallraven
- Flashed
- Fox 40
- Fox River
- Friends of Frontenac Park
- Friends of Killarney Park
- Friends of Temagami
- Gabel
- Ganaraska Hiking Trail Assoc
- Gear Aid
- Gerber
- Go-Girl
- Goal Zero
- Grayl
- Grey Owl
- GSI
- Haliburton Highlands
- Hanz
- Happy Yak
- Harmony
- Helinox
- Hennessy
- Hikers
- Hotcore
- Humangear
- Hydro Flask
- Icebreaker
- Icer's
- Indyeva
- Indygena
- Innova
- Jetboil
- Katadyn
- KEEN
- KIHD Products
- Kombi
- Kuhl
- KUMA
- La Sportiva
- Leatherman
- Leki
- Level Six
- Life Is Good
- Lifestraw
- Light My Fire
- Lole
- Lone Pine Publishing
- Lucky Duct
- M & B
- Magic Cool
- Malone
- Marmot
- Massassauga Provincial Park
- Merrell
- Moneysworth & Best
- MoraKniv
- Mosquito Shield
- Mpowerd
- MSR
- Nalgene
- Nebo
- Nikwax
- Nite Ize
- North 49
- North Water
- Nova Craft
- NRS
- nuun
- Oboz
- Old Town
- Olukai
- Omega
- Omega Pacific
- Ontario Parks
- OPS
- Optimus
- Original Bug Shirt
- Osprey
- Outbound
- Outdoor Research
- Outdoors Oriented
- Outside Inside
- PackTowl
- PacSafe
- Patagonia
- PatchNRepair
- Pelican
- Perception
- Petzl
- Pistil
- Platypus
- Pocket Disc
- Port Dalhousie Supply Co.
- Primus
- Pristine
- Ram
- ReCap
- Recreational Barrel Works
- Red Paddle Co.
- Red Pine
- Redback
- Riverstones
- Rome
- Royal Robbins
- Ruffwear
- Ryders
- S'well
- Salomon
- Salus
- Saxx
- Scotty
- Sea to Summit
- SealLine
- Shipping
- Sierra Dawn
- Silva
- Slackline Industries
- Smartwool
- Smith
- SOL
- SOLE
- Sprigs
- Sterling
- Stohlquist
- Sun Bum
- Suncloud
- Sunrise
- Super Feet
- Superfeet
- Sven-Saw
- Tarma Designs
- Tasco
- Teal
- Tender
- Tentree
- Tentsile
- Teva
- The North Face
- Therm-a-Rest
- Thule
- Tick Key
- Tilley
- Trespass
- Tulita Outdoors
- UCO
- Unlostify
- UST
- Vasque
- Vibram Five Fingers
- Victorinox
- Werner
- Wigwam
- Wilderness Systems
- Wiley Publishing Inc
- World Famous
- Yakima
- Yaktrax
- Yet-Eh
- Yeti
- Zippo
+
Products
Ryders Bourbon Polarized
$89.95 CAD
-
Technical features fused with a classic, casual shape make the Bourbon ideal for adventures from beer festivals to downhill races.
FIT: Medium - Large
Base Curve: 6C
Click Here for Lens Tint Details
POLARIZED TECHNOLOGY: ELIMINATE GLARE AND INCREASE DEFINITION
Where there is light there is always glare. It’s caused when light hits a surface, becomes concentrated, then reflects into your eyes. Polarized lenses eliminate glare from horizontal surfaces [roads, water, ice, snow, etc.] allowing details to show through, drastically reducing eye strain.
Ryders' Polarized lenses are made using an injection process that ensures they’re optically correct, decreasing eye fatigue and increasing comfort. As with all of Ryders' lenses, RYDERS Polarized lenses provide protection against 100% UVA, UVB, UVC and harmful blue light to 400nm.
This is a Canadian company
-
UV PROTECTION: All of Ryders' lenses block 100% of UVA, UVB, and UVC rays, and harmful blue light to 400nm. These harmful rays are a leading cause of cataracts, skin cancer and wrinkles around the eyes—all great reasons to block them out.
HYDROPHOBIC + OLEOPHOBIC COATING: An altogether misleading name, this coating isn't nearly as scared of water as water is of the coating. In fact, water runs away at first contact, leaving clear lines of sight that are free from droplets and water marks. The Oleophobic characteristics repel dirt and grease, making the lenses very easy to clean.
IMPACT RESISTANT: All of Ryders' lenses are impact resistant, meaning they resist breaking up into dangerous little shards when impacted. If astronauts trust this material to keep their heads from exploding while on a 17,000 mph space walk, you’ll have nothing to worry about on your adventures, no matter how fast you’re going.
OPTICALLY CORRECT: The lenses in all of Ryders' sunglasses are made by injecting molten polycarbonate into a mold that is specially shaped to eliminate distortion. This process makes the lenses optically correct, increasing comfort and minimizing eye fatigue.
SCRATCH-RESISTANT COATING: Ryders apply a scratch-resistant coating to all of their lenses. Though this process makes the surface of the lens considerably harder than the base lens material, it’s impossible to make the lenses completely scratch proof (short of making them from diamonds) so please care for them properly as they may still scratch under certain conditions. -
GRILAMID TR90: A Swiss technology, this incredible thermoplastic is the material used in all of Ryders sunglasses (with the exception of the metal frames). Its extreme flexibility, durability and light weight make it the perfect material for performance eyewear.
HYDROPHILIC NOSE PADS + TEMPLE TIPS: Hydrophilic [anti-slip] nose pads are an important feature to look for in performance eyewear. The material Ryders' uses to make these features is so effective that it actually grips better when it’s wet — exactly when it’s needed.
ADJUSTABLE NOSE PADS + TEMPLE TIPS: Adjustable nose pads and temple tips allow you to customize the fit of your eyewear for comfort and stability. These components are also used for fine-tuning the amount of arflow behind the lens to keep your face cool and combat fogging.
Ryders Bowery Anti-Fog
$89.95 CAD
-
The Bowery gives you the increased peripheral vision of old school wraps and applies it to a contemporary shape that will have people asking where you got your glasses wherever you go.
FIT: Medium - Large
Base Curve: 8C
Click Here for Lens Tint Details
antiFOG TECHNOLOGY: FINALLY, BIKE EYEWEAR YOU CAN LEAVE ON YOUR FACE.
Whether you’re grinding through a tight, twisty climb or simply stopped at an intersection, fogged lenses are an inevitability for many of us when wearing sports eyewear. The RYDERS antiFOG lens is the ultimate solution to this all-too-common problem.
Ryders high-quality antiFOG will stave off condensation so you can enjoy all of the benefits of the lens without the hazardous distraction of fog.This is a Canadian company
-
UV PROTECTION: All of Ryders' lenses block 100% of UVA, UVB, and UVC rays, and harmful blue light to 400nm. These harmful rays are a leading cause of cataracts, skin cancer and wrinkles around the eyes—all great reasons to block them out.
HYDROPHOBIC + OLEOPHOBIC COATING: An altogether misleading name, this coating isn't nearly as scared of water as water is of the coating. In fact, water runs away at first contact, leaving clear lines of sight that are free from droplets and water marks. The Oleophobic characteristics repel dirt and grease, making the lenses very easy to clean.
IMPACT RESISTANT: All of Ryders' lenses are impact resistant, meaning they resist breaking up into dangerous little shards when impacted. If astronauts trust this material to keep their heads from exploding while on a 17,000 mph space walk, you’ll have nothing to worry about on your adventures, no matter how fast you’re going.
OPTICALLY CORRECT: The lenses in all of Ryders' sunglasses are made by injecting molten polycarbonate into a mold that is specially shaped to eliminate distortion. This process makes the lenses optically correct, increasing comfort and minimizing eye fatigue.
SCRATCH-RESISTANT COATING: Ryders apply a scratch-resistant coating to all of their lenses. Though this process makes the surface of the lens considerably harder than the base lens material, it’s impossible to make the lenses completely scratch proof (short of making them from diamonds) so please care for them properly as they may still scratch under certain conditions. -
GRILAMID TR90: A Swiss technology, this incredible thermoplastic is the material used in all of Ryders sunglasses (with the exception of the metal frames). Its extreme flexibility, durability and light weight make it the perfect material for performance eyewear.
HYDROPHILIC NOSE PADS + TEMPLE TIPS: Hydrophilic [anti-slip] nose pads are an important feature to look for in performance eyewear. The material Ryders' uses to make these features is so effective that it actually grips better when it’s wet — exactly when it’s needed.
ADJUSTABLE NOSE PADS + TEMPLE TIPS: Adjustable nose pads and temple tips allow you to customize the fit of your eyewear for comfort and stability. These components are also used for fine-tuning the amount of airflow behind the lens to keep your face cool and combat fogging.
Ryders Cakewalk
$59.99 CAD
-
Named after a technical trail in Squamish BC, this model looks as great as it needs to in order to be called the Cakewalk and get away with it. Its hidden techy components including hydrophilic nose pads and temple tips keep it in place when you want to use it for something more difficult than an actual cakewalk.
FIT: Medium-Large
WEIGHT: 26g
Click Here for Lens Tint DetailsThis is a Canadian company
-
UV PROTECTION: All of Ryders' lenses block 100% of UVA, UVB, and UVC rays, and harmful blue light to 400nm. These harmful rays are a leading cause of cataracts, skin cancer and wrinkles around the eyes—all great reasons to block them out.
HYDROPHOBIC + OLEOPHOBIC COATING: An altogether misleading name, this coating isn't nearly as scared of water as water is of the coating. In fact, water runs away at first contact, leaving clear lines of sight that are free from droplets and water marks. The Oleophobic characteristics repel dirt and grease, making the lenses very easy to clean.
IMPACT RESISTANT: All of Ryders' lenses are impact resistant, meaning they resist breaking up into dangerous little shards when impacted. If astronauts trust this material to keep their heads from exploding while on a 17,000 mph space walk, you’ll have nothing to worry about on your adventures, no matter how fast you’re going.
OPTICALLY CORRECT: The lenses in all of Ryders' sunglasses are made by injecting molten polycarbonate into a mold that is specially shaped to eliminate distortion. This process makes the lenses optically correct, increasing comfort and minimizing eye fatigue.
SCRATCH-RESISTANT COATING: Ryders apply a scratch-resistant coating to all of their lenses. Though this process makes the surface of the lens considerably harder than the base lens material, it’s impossible to make the lenses completely scratch proof (short of making them from diamonds) so please care for them properly as they may still scratch under certain conditions. -
GRILAMID TR90
A Swiss technology, this incredible thermoplastic is the material used in all of our sunglasses (with the exception of our metal frames). Its extreme flexibility, durability and light weight make it the perfect material for performance eyewear.
HYDROPHILIC NOSE PADS + TEMPLE TIPS
Hydrophilic [anti-slip] nose pads are an important feature to look for in performance eyewear. Hydrophilic temple tips give that extra little bit of grip that can come in handy in many situations. The material we use to make these features is so effective that it actually grips better when it’s wet — exactly when it’s needed.
Ryders Caliber
$49.95 CAD
-
An evolution of one of Ryders' classic performance styles, the adjustability of the new Caliber allows you to customize the fit to your preferences. The wide temple arms provide extra protection, and the lens geometry is optimized for full coverage and a great field of vision.
FIT: Large
Base Curve: 8C
Click Here for Lens Tint DetailsThis is a Canadian company
-
UV PROTECTION: All of Ryders' lenses block 100% of UVA, UVB, and UVC rays, and harmful blue light to 400nm. These harmful rays are a leading cause of cataracts, skin cancer and wrinkles around the eyes—all great reasons to block them out.
HYDROPHOBIC + OLEOPHOBIC COATING: An altogether misleading name, this coating isn't nearly as scared of water as water is of the coating. In fact, water runs away at first contact, leaving clear lines of sight that are free from droplets and water marks. The Oleophobic characteristics repel dirt and grease, making the lenses very easy to clean.
IMPACT RESISTANT: All of Ryders' lenses are impact resistant, meaning they resist breaking up into dangerous little shards when impacted. If astronauts trust this material to keep their heads from exploding while on a 17,000 mph space walk, you’ll have nothing to worry about on your adventures, no matter how fast you’re going.
OPTICALLY CORRECT: The lenses in all of Ryders' sunglasses are made by injecting molten polycarbonate into a mold that is specially shaped to eliminate distortion. This process makes the lenses optically correct, increasing comfort and minimizing eye fatigue.
SCRATCH-RESISTANT COATING: Ryders apply a scratch-resistant coating to all of their lenses. Though this process makes the surface of the lens considerably harder than the base lens material, it’s impossible to make the lenses completely scratch proof (short of making them from diamonds) so please care for them properly as they may still scratch under certain conditions. -
GRILAMID TR90: A Swiss technology, this incredible thermoplastic is the material used in all of Ryders' sunglasses (with the exception of the metal frames). Its extreme flexibility, durability and light weight make it the perfect material for performance eyewear.
HYDROPHILIC NOSE PADS + TEMPLE TIPS: Hydrophilic [anti-slip] nose pads are an important feature to look for in performance eyewear. Hydrophilic temple tips give that extra little bit of grip that can come in handy in many situations. The material Ryders uses to make these features is so effective that it actually grips better when it’s wet — exactly when it’s needed.
ADJUSTABLE NOSE PADS + TEMPLE TIPS: Adjustable nose pads and temple tips allow you to customize the fit of your eyewear for comfort and stability. This component is also used for fine-tuning the amount of airflow behind the lens to keep your face cool and combat fogging.
Ryders Carnaby
$49.95 CAD
-
The Carnaby is a smaller fitting version of Ryders' best-selling Anzana frame - its split temple gives it a casual look, but don’t let it mislead you; the 8-base lens gives you a full field of vision to accomplish your best performance.
FIT: Medium
Base Curve: 8C
Click Here for Lens Tint DetailsThis is a Canadian company
-
UV PROTECTION: All of Ryders' lenses block 100% of UVA, UVB, and UVC rays, and harmful blue light to 400nm. These harmful rays are a leading cause of cataracts, skin cancer and wrinkles around the eyes—all great reasons to block them out.
HYDROPHOBIC + OLEOPHOBIC COATING: An altogether misleading name, this coating isn't nearly as scared of water as water is of the coating. In fact, water runs away at first contact, leaving clear lines of sight that are free from droplets and water marks. The Oleophobic characteristics repel dirt and grease, making the lenses very easy to clean.
IMPACT RESISTANT: All of Ryders' lenses are impact resistant, meaning they resist breaking up into dangerous little shards when impacted. If astronauts trust this material to keep their heads from exploding while on a 17,000 mph space walk, you’ll have nothing to worry about on your adventures, no matter how fast you’re going.
OPTICALLY CORRECT: The lenses in all of Ryders' sunglasses are made by injecting molten polycarbonate into a mold that is specially shaped to eliminate distortion. This process makes the lenses optically correct, increasing comfort and minimizing eye fatigue.
SCRATCH-RESISTANT COATING: Ryders apply a scratch-resistant coating to all of their lenses. Though this process makes the surface of the lens considerably harder than the base lens material, it’s impossible to make the lenses completely scratch proof (short of making them from diamonds) so please care for them properly as they may still scratch under certain conditions. -
GRILAMID TR90: A Swiss technology, this incredible thermoplastic is the material used in all of Ryders sunglasses (with the exception of the metal frames). Its extreme flexibility, durability and light weight make it the perfect material for performance eyewear.
HYDROPHILIC NOSE PADS + TEMPLE TIPS: Hydrophilic [anti-slip] nose pads are an important feature to look for in performance eyewear. The material Ryders' uses to make these features is so effective that it actually grips better when it’s wet — exactly when it’s needed.
Ryders Chops
$49.95 CAD
-
Probably the only chunky model on the runway.
FIT: Large
WEIGHT: 30g
Click Here for Lens Tint DetailsThis is a Canadian company
-
POLYCARBONATE LENS MATERIAL: Polycarbonate is the extraordinarily durable thermoplastic that’s used in bulletproof glass, riot shields and astronaut helmets. It’s the ideal material for performance eyewear because of its high impact resistance, inherent UV protection and light weight. All of Ryders' lenses are made of polycarbonate.
UV PROTECTION: All of Ryders' lenses block 100% of UVA, UVB, and UVC rays, and harmful blue light to 400nm. These harmful rays are a leading cause of cataracts, skin cancer and wrinkles around the eyes—all great reasons to block them out.
SHATTERPROOF: All of Ryders' lenses are shatterproof, meaning they won’t break up into dangerous little shards when impacted. An extremely strong impact may damage the lens, but it will never shatter. If astronauts trust this material to keep their heads from exploding while on a 17,000 mph space walk, you’ll have nothing to worry about on your adventures, no matter how fast you’re going.
OPTICALLY CORRECT: The lenses in all of Ryders' sunglasses are made by injecting molten polycarbonate into a mold that is specially shaped to eliminate distortion. This process makes the lenses optically correct, increasing comfort and minimizing eye fatigue.
SCRATCH-RESISTANT COATING: Ryders apply a scratch-resistant coating to all of their lenses. Though this process makes the surface of the lens considerably harder than the base lens material, it’s impossible to make the lenses completely scratch proof (short of making them from diamonds) so please care for them properly as they may still scratch under certain conditions.
HYDROPHOBIC COATING: An altogether misleading name, this coating isn't nearly as scared of water as water is of the coating. In fact, water runs away at first contact, leaving clear lines of sight that are free from droplets and water marks. -
TR90 SWITZERLAND: A Swiss technology, this thermoplastic is the material used in all of Ryders' sunglasses (with the exception of the metal frames). Its extreme flexibility, durability and light weight make it the perfect material for performance eyewear.
HYDROPHILIC NOSE PADS: Hydrophilic [anti-slip] nose pads are an important feature to look for in performance eyewear. Ryders hydrophilic material is so effective that it actually grips better when it’s wet — exactly when it’s needed.
Ryders Corsair
$59.95 CAD
-
The name says it all. Cor is a word Ryders made up that translates to "small aviator that still offers great lens coverage." Sair refers to the exact moment that you realize there's an aviator designed specifcially for your small face.
FIT: Small
WEIGHT: 28g
Click Here for Lens Tint DetailsThis is a Canadian company
-
POLYCARBONATE LENS MATERIAL: Polycarbonate is the extraordinarily durable thermoplastic that’s used in bulletproof glass, riot shields and astronaut helmets. It’s the ideal material for performance eyewear because of its high impact resistance, inherent UV protection and light weight. All of Ryders' lenses are made of polycarbonate.
UV PROTECTION: All of Ryders' lenses block 100% of UVA, UVB, and UVC rays, and harmful blue light to 400nm. These harmful rays are a leading cause of cataracts, skin cancer and wrinkles around the eyes—all great reasons to block them out.
SHATTERPROOF: All of Ryders' lenses are shatterproof, meaning they won’t break up into dangerous little shards when impacted. An extremely strong impact may damage the lens, but it will never shatter. If astronauts trust this material to keep their heads from exploding while on a 17,000 mph space walk, you’ll have nothing to worry about on your adventures, no matter how fast you’re going.
OPTICALLY CORRECT: The lenses in all of Ryders' sunglasses are made by injecting molten polycarbonate into a mold that is specially shaped to eliminate distortion. This process makes the lenses optically correct, increasing comfort and minimizing eye fatigue.
SCRATCH-RESISTANT COATING: Ryders apply a scratch-resistant coating to all of their lenses. Though this process makes the surface of the lens considerably harder than the base lens material, it’s impossible to make the lenses completely scratch proof (short of making them from diamonds) so please care for them properly as they may still scratch under certain conditions.
HYDROPHOBIC COATING: An altogether misleading name, this coating isn't nearly as scared of water as water is of the coating. In fact, water runs away at first contact, leaving clear lines of sight that are free from droplets and water marks. - N/S18 METAL: Standing for 18% Nickel-Silver, N/S18 is the lightweight, durable and extremely corrosion-resistant alloy we use for all of our metal frames. A combination of nickel, zinc and copper, N/S18 gets its high strength from the high concentration of nickel. As a precaution for those who may be sensitive to some metals, we apply a hypoallergenic polymer coating to all of our metal frames.
Ryders Empress Polarized
$69.99 CAD
-
Originally intended to be worn by leopards, Ryders designers got tired of risking their lives to perfect the form of the EMPRESS. At that point they realized that the EMPRESS looked way better on people. Problem solved.
FIT: Medium
Click Here for Lens Tint Details
POLARIZED TECHNOLOGY: ELIMINATE GLARE AND INCREASE DEFINITION
Where there is light there is always glare. It’s caused when light hits a surface, becomes concentrated, then reflects into your eyes. Polarized lenses eliminate glare from horizontal surfaces [roads, water, ice, snow, etc.] allowing details to show through, drastically reducing eye strain.
Ryders' Polarized lenses are made using an injection process that ensures they’re optically correct, decreasing eye fatigue and increasing comfort. As with all of Ryders' lenses, RYDERS Polarized lenses provide protection against 100% UVA, UVB, UVC and harmful blue light to 400nm.This is a Canadian company
-
UV PROTECTION: All of Ryders' lenses block 100% of UVA, UVB, and UVC rays, and harmful blue light to 400nm. These harmful rays are a leading cause of cataracts, skin cancer and wrinkles around the eyes—all great reasons to block them out.
HYDROPHOBIC + OLEOPHOBIC COATING: An altogether misleading name, this coating isn't nearly as scared of water as water is of the coating. In fact, water runs away at first contact, leaving clear lines of sight that are free from droplets and water marks. The Oleophobic characteristics repel dirt and grease, making the lenses very easy to clean.
IMPACT RESISTANT: All of Ryders' lenses are impact resistant, meaning they resist breaking up into dangerous little shards when impacted. If astronauts trust this material to keep their heads from exploding while on a 17,000 mph space walk, you’ll have nothing to worry about on your adventures, no matter how fast you’re going.
OPTICALLY CORRECT: The lenses in all of Ryders' sunglasses are made by injecting molten polycarbonate into a mold that is specially shaped to eliminate distortion. This process makes the lenses optically correct, increasing comfort and minimizing eye fatigue.
SCRATCH-RESISTANT COATING: Ryders apply a scratch-resistant coating to all of their lenses. Though this process makes the surface of the lens considerably harder than the base lens material, it’s impossible to make the lenses completely scratch proof (short of making them from diamonds) so please care for them properly as they may still scratch under certain conditions. -
GRILAMID TR90
A Swiss technology, this incredible thermoplastic is the material used in all of Ryders sunglasses (with the exception of the metal frames). Its extreme flexibility, durability and light weight make it the perfect material for performance eyewear.
HYDROPHILIC NOSE PADS + TEMPLE TIPS
Hydrophilic [anti-slip] nose pads are an important feature to look for in performance eyewear. The material Ryders' uses to make these features is so effective that it actually grips better when it’s wet — exactly when it’s needed.
Ryders Fifth Anti-Fog
$79.95 CAD
– Sold Out-
Ryders wanted to design a semi-rim that deserves to be launched in 2020 - not the semi-rim that you've seen a million times before... but that still has the classic functionality. This is the Fifth - sleek, polished, unique.
FIT: Medium - Large
Base Curve: 8C
Click Here for Lens Tint Details
antiFOG TECHNOLOGY: FINALLY, BIKE EYEWEAR YOU CAN LEAVE ON YOUR FACE.
Whether you’re grinding through a tight, twisty climb or simply stopped at an intersection, fogged lenses are an inevitability for many of us when wearing sports eyewear. The RYDERS antiFOG lens is the ultimate solution to this all-too-common problem.
Ryders high-quality antiFOG will stave off condensation so you can enjoy all of the benefits of the lens without the hazardous distraction of fog.This is a Canadian company
-
UV PROTECTION: All of Ryders' lenses block 100% of UVA, UVB, and UVC rays, and harmful blue light to 400nm. These harmful rays are a leading cause of cataracts, skin cancer and wrinkles around the eyes—all great reasons to block them out.
HYDROPHOBIC + OLEOPHOBIC COATING: An altogether misleading name, this coating isn't nearly as scared of water as water is of the coating. In fact, water runs away at first contact, leaving clear lines of sight that are free from droplets and water marks. The Oleophobic characteristics repel dirt and grease, making the lenses very easy to clean.
IMPACT RESISTANT: All of Ryders' lenses are impact resistant, meaning they resist breaking up into dangerous little shards when impacted. If astronauts trust this material to keep their heads from exploding while on a 17,000 mph space walk, you’ll have nothing to worry about on your adventures, no matter how fast you’re going.
OPTICALLY CORRECT: The lenses in all of Ryders' sunglasses are made by injecting molten polycarbonate into a mold that is specially shaped to eliminate distortion. This process makes the lenses optically correct, increasing comfort and minimizing eye fatigue.
SCRATCH-RESISTANT COATING: Ryders apply a scratch-resistant coating to all of their lenses. Though this process makes the surface of the lens considerably harder than the base lens material, it’s impossible to make the lenses completely scratch proof (short of making them from diamonds) so please care for them properly as they may still scratch under certain conditions. -
GRILAMID TR90: A Swiss technology, this incredible thermoplastic is the material used in all of Ryders sunglasses (with the exception of the metal frames). Its extreme flexibility, durability and light weight make it the perfect material for performance eyewear.
HYDROPHILIC NOSE PADS + TEMPLE TIPS: Hydrophilic [anti-slip] nose pads are an important feature to look for in performance eyewear. The material Ryders' uses to make these features is so effective that it actually grips better when it’s wet — exactly when it’s needed.
ADJUSTABLE NOSE PADS + TEMPLE TIPS: Adjustable nose pads and temple tips allow you to customize the fit of your eyewear for comfort and stability. These components are also used for fine-tuning the amount of airflow behind the lens to keep your face cool and combat fogging.
Ryders Fifth Polarized
$89.95 CAD
-
Ryders wanted to design a semi-rim that deserves to be launched in 2020 - not the semi-rim that you've seen a million times before... but that still has the classic functionality. This is the Fifth - sleek, polished, unique.
FIT: Medium - Large
Base Curve: 8C
Click Here for Lens Tint Details
POLARIZED TECHNOLOGY: ELIMINATE GLARE AND INCREASE DEFINITION
Where there is light there is always glare. It’s caused when light hits a surface, becomes concentrated, then reflects into your eyes. Polarized lenses eliminate glare from horizontal surfaces [roads, water, ice, snow, etc.] allowing details to show through, drastically reducing eye strain.
Ryders' Polarized lenses are made using an injection process that ensures they’re optically correct, decreasing eye fatigue and increasing comfort. As with all of Ryders' lenses, RYDERS Polarized lenses provide protection against 100% UVA, UVB, UVC and harmful blue light to 400nm.This is a Canadian company
-
UV PROTECTION: All of Ryders' lenses block 100% of UVA, UVB, and UVC rays, and harmful blue light to 400nm. These harmful rays are a leading cause of cataracts, skin cancer and wrinkles around the eyes—all great reasons to block them out.
HYDROPHOBIC + OLEOPHOBIC COATING: An altogether misleading name, this coating isn't nearly as scared of water as water is of the coating. In fact, water runs away at first contact, leaving clear lines of sight that are free from droplets and water marks. The Oleophobic characteristics repel dirt and grease, making the lenses very easy to clean.
IMPACT RESISTANT: All of Ryders' lenses are impact resistant, meaning they resist breaking up into dangerous little shards when impacted. If astronauts trust this material to keep their heads from exploding while on a 17,000 mph space walk, you’ll have nothing to worry about on your adventures, no matter how fast you’re going.
OPTICALLY CORRECT: The lenses in all of Ryders' sunglasses are made by injecting molten polycarbonate into a mold that is specially shaped to eliminate distortion. This process makes the lenses optically correct, increasing comfort and minimizing eye fatigue.
SCRATCH-RESISTANT COATING: Ryders apply a scratch-resistant coating to all of their lenses. Though this process makes the surface of the lens considerably harder than the base lens material, it’s impossible to make the lenses completely scratch proof (short of making them from diamonds) so please care for them properly as they may still scratch under certain conditions. -
GRILAMID TR90: A Swiss technology, this incredible thermoplastic is the material used in all of Ryders sunglasses (with the exception of the metal frames). Its extreme flexibility, durability and light weight make it the perfect material for performance eyewear.
HYDROPHILIC NOSE PADS + TEMPLE TIPS: Hydrophilic [anti-slip] nose pads are an important feature to look for in performance eyewear. The material Ryders' uses to make these features is so effective that it actually grips better when it’s wet — exactly when it’s needed.
ADJUSTABLE NOSE PADS + TEMPLE TIPS: Adjustable nose pads and temple tips allow you to customize the fit of your eyewear for comfort and stability. These components are also used for fine-tuning the amount of airflow behind the lens to keep your face cool and combat fogging.
Ryders Hazel Polarized
$99.99 CAD
-
A perfect blend of fashion and function, the Hazel is a women's frame that can be customized in multiple ways. The side shields can be removed or added, depending on the look and function you're after, and the interchangeable nose pads can be switched for a custom fit.
FIT: Medium
Base Curve: 6C
Click Here for Lens Tint Details
POLARIZED TECHNOLOGY: ELIMINATE GLARE AND INCREASE DEFINITION
Where there is light there is always glare. It’s caused when light hits a surface, becomes concentrated, then reflects into your eyes. Polarized lenses eliminate glare from horizontal surfaces [roads, water, ice, snow, etc.] allowing details to show through, drastically reducing eye strain.
Ryders' Polarized lenses are made using an injection process that ensures they’re optically correct, decreasing eye fatigue and increasing comfort. As with all of Ryders' lenses, RYDERS Polarized lenses provide protection against 100% UVA, UVB, UVC and harmful blue light to 400nm.This is a Canadian company
-
UV PROTECTION: All of Ryders' lenses block 100% of UVA, UVB, and UVC rays, and harmful blue light to 400nm. These harmful rays are a leading cause of cataracts, skin cancer and wrinkles around the eyes—all great reasons to block them out.
HYDROPHOBIC + OLEOPHOBIC COATING: An altogether misleading name, this coating isn't nearly as scared of water as water is of the coating. In fact, water runs away at first contact, leaving clear lines of sight that are free from droplets and water marks. The Oleophobic characteristics repel dirt and grease, making the lenses very easy to clean.
IMPACT RESISTANT: All of Ryders' lenses are impact resistant, meaning they resist breaking up into dangerous little shards when impacted. If astronauts trust this material to keep their heads from exploding while on a 17,000 mph space walk, you’ll have nothing to worry about on your adventures, no matter how fast you’re going.
OPTICALLY CORRECT: The lenses in all of Ryders' sunglasses are made by injecting molten polycarbonate into a mold that is specially shaped to eliminate distortion. This process makes the lenses optically correct, increasing comfort and minimizing eye fatigue.
SCRATCH-RESISTANT COATING: Ryders apply a scratch-resistant coating to all of their lenses. Though this process makes the surface of the lens considerably harder than the base lens material, it’s impossible to make the lenses completely scratch proof (short of making them from diamonds) so please care for them properly as they may still scratch under certain conditions. -
GRILAMID TR90: A Swiss technology, this incredible thermoplastic is the material used in all of Ryders sunglasses (with the exception of the metal frames). Its extreme flexibility, durability and light weight make it the perfect material for performance eyewear.
HYDROPHILIC NOSE PADS + TEMPLE TIPS: Hydrophilic [anti-slip] nose pads are an important feature to look for in performance eyewear. The material Ryders' uses to make these features is so effective that it actually grips better when it’s wet — exactly when it’s needed.
ADJUSTABLE NOSE PADS + TEMPLE TIPS: Adjustable nose pads and temple tips allow you to customize the fit of your eyewear for comfort and stability. These components are also used for fine-tuning the amount of arflow behind the lens to keep your face cool and combat fogging.
Ryders Hillroy
$49.95 CAD
-
Similar to a baroque symphony featuring a celebrity DJ, the Hillroy is a classic design with modern upgrades. Despite its casual appearance the Hillroy comes equipped with anti-slip nose pads and shatterproof lenses, so you can still wear them on the bike.
FIT: Medium-Large
WEIGHT: 28g
Click Here for Lens Tint DetailsThis is a Canadian company
-
UV PROTECTION: All of Ryders' lenses block 100% of UVA, UVB, and UVC rays, and harmful blue light to 400nm. These harmful rays are a leading cause of cataracts, skin cancer and wrinkles around the eyes—all great reasons to block them out.
HYDROPHOBIC + OLEOPHOBIC COATING: An altogether misleading name, this coating isn't nearly as scared of water as water is of the coating. In fact, water runs away at first contact, leaving clear lines of sight that are free from droplets and water marks. The Oleophobic characteristics repel dirt and grease, making the lenses very easy to clean.
IMPACT RESISTANT: All of Ryders' lenses are impact resistant, meaning they resist breaking up into dangerous little shards when impacted. If astronauts trust this material to keep their heads from exploding while on a 17,000 mph space walk, you’ll have nothing to worry about on your adventures, no matter how fast you’re going.
OPTICALLY CORRECT: The lenses in all of Ryders' sunglasses are made by injecting molten polycarbonate into a mold that is specially shaped to eliminate distortion. This process makes the lenses optically correct, increasing comfort and minimizing eye fatigue.
SCRATCH-RESISTANT COATING: Ryders apply a scratch-resistant coating to all of their lenses. Though this process makes the surface of the lens considerably harder than the base lens material, it’s impossible to make the lenses completely scratch proof (short of making them from diamonds) so please care for them properly as they may still scratch under certain conditions. -
GRILAMID TR90
A Swiss technology, this incredible thermoplastic is the material used in all of our sunglasses (with the exception of our metal frames). Its extreme flexibility, durability and light weight make it the perfect material for performance eyewear.
HYDROPHILIC NOSE PADS
Hydrophilic [anti-slip] nose pads are an important feature to look for in performance eyewear. The material we use to make these features is so effective that it actually grips better when it’s wet—exactly when it’s needed.
Ryders Howler
$49.95 CAD
-
The Howler is a classic sport wrap with performance upgrades. The wide temples block peripheral light, the lenses wrap perfectly for an optimal field of vision, and the hydrophilic components improve stability, keeping the glasses in place when things get hairy.
FIT: Medium
WEIGHT: 32g
Click Here for Lens Tint DetailsThis is a Canadian company
-
UV PROTECTION: All of Ryders' lenses block 100% of UVA, UVB, and UVC rays, and harmful blue light to 400nm. These harmful rays are a leading cause of cataracts, skin cancer and wrinkles around the eyes—all great reasons to block them out.
HYDROPHOBIC + OLEOPHOBIC COATING: An altogether misleading name, this coating isn't nearly as scared of water as water is of the coating. In fact, water runs away at first contact, leaving clear lines of sight that are free from droplets and water marks. The Oleophobic characteristics repel dirt and grease, making the lenses very easy to clean.
IMPACT RESISTANT: All of Ryders' lenses are impact resistant, meaning they resist breaking up into dangerous little shards when impacted. If astronauts trust this material to keep their heads from exploding while on a 17,000 mph space walk, you’ll have nothing to worry about on your adventures, no matter how fast you’re going.
OPTICALLY CORRECT: The lenses in all of Ryders' sunglasses are made by injecting molten polycarbonate into a mold that is specially shaped to eliminate distortion. This process makes the lenses optically correct, increasing comfort and minimizing eye fatigue.
SCRATCH-RESISTANT COATING: Ryders apply a scratch-resistant coating to all of their lenses. Though this process makes the surface of the lens considerably harder than the base lens material, it’s impossible to make the lenses completely scratch proof (short of making them from diamonds) so please care for them properly as they may still scratch under certain conditions. -
GRILAMID TR90
A Swiss technology, this incredible thermoplastic is the material used in all of our sunglasses (with the exception of our metal frames). Its extreme flexibility, durability and light weight make it the perfect material for performance eyewear.
HYDROPHILIC NOSE PADS + TEMPLE TIPS
Hydrophilic [anti-slip] nose pads are an important feature to look for in performance eyewear. Hydrophilic temple tips give that extra little bit of grip that can come in handy in many situations. The material we use to make these features is so effective that it actually grips better when it’s wet — exactly when it’s needed.
Ryders Howler Polarized
$99.95 CAD
– Sold Out-
The Howler is a classic sport wrap with performance upgrades. The wide temples block peripheral light, the lenses wrap perfectly for an optimal field of vision, and the hydrophilic components improve stability, keeping the glasses in place when things get hairy.
FIT: Medium
Base Curve: 6C
Click Here for Lens Tint Details
POLARIZED TECHNOLOGY: ELIMINATE GLARE AND INCREASE DEFINITION
Where there is light there is always glare. It’s caused when light hits a surface, becomes concentrated, then reflects into your eyes. Polarized lenses eliminate glare from horizontal surfaces [roads, water, ice, snow, etc.] allowing details to show through, drastically reducing eye strain.
Ryders' Polarized lenses are made using an injection process that ensures they’re optically correct, decreasing eye fatigue and increasing comfort. As with all of Ryders' lenses, RYDERS Polarized lenses provide protection against 100% UVA, UVB, UVC and harmful blue light to 400nm.This is a Canadian company
-
UV PROTECTION: All of Ryders' lenses block 100% of UVA, UVB, and UVC rays, and harmful blue light to 400nm. These harmful rays are a leading cause of cataracts, skin cancer and wrinkles around the eyes—all great reasons to block them out.
HYDROPHOBIC + OLEOPHOBIC COATING: An altogether misleading name, this coating isn't nearly as scared of water as water is of the coating. In fact, water runs away at first contact, leaving clear lines of sight that are free from droplets and water marks. The Oleophobic characteristics repel dirt and grease, making the lenses very easy to clean.
IMPACT RESISTANT: All of Ryders' lenses are impact resistant, meaning they resist breaking up into dangerous little shards when impacted. If astronauts trust this material to keep their heads from exploding while on a 17,000 mph space walk, you’ll have nothing to worry about on your adventures, no matter how fast you’re going.
OPTICALLY CORRECT: The lenses in all of Ryders' sunglasses are made by injecting molten polycarbonate into a mold that is specially shaped to eliminate distortion. This process makes the lenses optically correct, increasing comfort and minimizing eye fatigue.
SCRATCH-RESISTANT COATING: Ryders apply a scratch-resistant coating to all of their lenses. Though this process makes the surface of the lens considerably harder than the base lens material, it’s impossible to make the lenses completely scratch proof (short of making them from diamonds) so please care for them properly as they may still scratch under certain conditions. -
GRILAMID TR90: A Swiss technology, this incredible thermoplastic is the material used in all of Ryders sunglasses (with the exception of the metal frames). Its extreme flexibility, durability and light weight make it the perfect material for performance eyewear.
HYDROPHILIC NOSE PADS + TEMPLE TIPS: Hydrophilic [anti-slip] nose pads are an important feature to look for in performance eyewear. The material Ryders' uses to make these features is so effective that it actually grips better when it’s wet — exactly when it’s needed.
Ryders Jackson
$49.95 CAD
-
Clean lines inspired by time-honoured designs, the Jackson is a classic casual shape offering great coverage in a light-weight package. The Jackson will be available as part of the Ryders Core and Polarized collections.
FIT: Medium
WEIGHT: 26g
Click Here for Lens Tint DetailsThis is a Canadian company
-
UV PROTECTION: All of Ryders' lenses block 100% of UVA, UVB, and UVC rays, and harmful blue light to 400nm. These harmful rays are a leading cause of cataracts, skin cancer and wrinkles around the eyes—all great reasons to block them out.
HYDROPHOBIC + OLEOPHOBIC COATING: An altogether misleading name, this coating isn't nearly as scared of water as water is of the coating. In fact, water runs away at first contact, leaving clear lines of sight that are free from droplets and water marks. The Oleophobic characteristics repel dirt and grease, making the lenses very easy to clean.
IMPACT RESISTANT: All of Ryders' lenses are impact resistant, meaning they resist breaking up into dangerous little shards when impacted. If astronauts trust this material to keep their heads from exploding while on a 17,000 mph space walk, you’ll have nothing to worry about on your adventures, no matter how fast you’re going.
OPTICALLY CORRECT: The lenses in all of Ryders' sunglasses are made by injecting molten polycarbonate into a mold that is specially shaped to eliminate distortion. This process makes the lenses optically correct, increasing comfort and minimizing eye fatigue.
SCRATCH-RESISTANT COATING: Ryders apply a scratch-resistant coating to all of their lenses. Though this process makes the surface of the lens considerably harder than the base lens material, it’s impossible to make the lenses completely scratch proof (short of making them from diamonds) so please care for them properly as they may still scratch under certain conditions. -
GRILAMID TR90
A Swiss technology, this incredible thermoplastic is the material used in all of our sunglasses (with the exception of our metal frames). Its extreme flexibility, durability and light weight make it the perfect material for performance eyewear.
HYDROPHILIC NOSE PADS
Hydrophilic [anti-slip] nose pads are an important feature to look for in performance eyewear. The material we use to make these features is so effective that it actually grips better when it’s wet — exactly when it’s needed.
Ryders Loops
$49.99 CAD
-
The Loops features a Ryders twist to a classic frame shape. The result is a functional, good-looking style that fits a wide range of face shapes.
FIT: Large
WEIGHT: 30g
Click Here for Lens Tint DetailsThis is a Canadian company
-
HYDROPHOBIC + OLEOPHOBIC COATING: An altogether misleading name, this coating isn't nearly as scared of water as water is of the coating. In fact, water runs away at first contact, leaving clear lines of sight that are free from droplets and water marks. The Oleophobic characteristics repel dirt and grease, making the lenses very easy to clean.
UV PROTECTION: All of Ryders' lenses block 100% of UVA, UVB, and UVC rays, and harmful blue light to 400nm. These harmful rays are a leading cause of cataracts, skin cancer and wrinkles around the eyes—all great reasons to block them out.
IMPACT RESISTANT: All of Ryders' lenses are impact resistant, meaning they resist breaking up into dangerous little shards when impacted. If astronauts trust this material to keep their heads from exploding while on a 17,000 mph space walk, you’ll have nothing to worry about on your adventures, no matter how fast you’re going.
OPTICALLY CORRECT: The lenses in all of Ryders' sunglasses are made by injecting molten polycarbonate into a mold that is specially shaped to eliminate distortion. This process makes the lenses optically correct, increasing comfort and minimizing eye fatigue.
SCRATCH-RESISTANT COATING: Ryders applys a scratch-resistant coating to all of their lenses. Though this process makes the surface of the lens considerably harder than the base lens material, it’s impossible to make the lenses completely scratch proof (short of making them from diamonds) so please care for them properly as they may still scratch under certain conditions.
-
GRILAMID TR90: A Swiss technology, this incredible thermoplastic is the material used in all of our sunglasses (with the exception of our metal frames). Its extreme flexibility, durability and light weight make it the perfect material for performance eyewear.
HYDROPHILIC NOSE PADS: Hydrophilic [anti-slip] nose pads are an important feature to look for in performance eyewear. Ryders' hydrophilic material is so effective that it actually grips better when it’s wet — exactly when it’s needed.
Ryders Nelson Polarized
$99.95 CAD
-
Inspired by a RYDERS classic, the Nelson is a taller and higher-tech version of the ever-popular Hillroy. Despite its handsome looks, it’s not all about style. Thanks to its big lenses along with its hydrophilic nose pads and temple tips, when it comes to performance it can stand toe-to-toe with much sportier-looking eyewear.
FIT: Large
WEIGHT: 28g
Click Here for Lens Tint Details
POLARIZED TECHNOLOGY: ELIMINATE GLARE AND INCREASE DEFINITION
Where there is light there is always glare. It’s caused when light hits a surface, becomes concentrated, then reflects into your eyes. Polarized lenses eliminate glare from horizontal surfaces [roads, water, ice, snow, etc.] allowing details to show through, drastically reducing eye strain.
Ryders' Polarized lenses are made using an injection process that ensures they’re optically correct, decreasing eye fatigue and increasing comfort. As with all of Ryders' lenses, RYDERS Polarized lenses provide protection against 100% UVA, UVB, UVC and harmful blue light to 400nm.This is a Canadian company
-
100% UV400 Protection: All of Ryders' lenses block 100% of UVA, UVB, and UVC rays and harmful, high energy light to 400nm. These rays are a leading cause of cataracts, skin cancer and wrinkles around the eyes—all great reasons to block them out.
Impact Resistant: All of Ryders' lenses are impact resistant, meaning they resist breaking up into dangerous little shards when impacted. If astronauts trust this material to keep their heads from exploding while on a 17,000 mph space walk, you’ll have nothing to worry about on your adventures, no matter how fast you’re going.
Optically Correct: All of Ryders' lenses are made by injecting molten polycarbonate into a mold that is specially formed to eliminate distortion. This process makes the lenses optically correct (also referred to as decentred), increasing long-term comfort and minimizing eye fatigue.
Scratch-Resistant Coating: Ryders apply a scratch-resistant coating to all of our lenses. Though this process makes the surface of the lens considerably harder than the base lens material, it’s impossible to make the lenses completely scratch proof (short of making them from diamonds) so please care for them properly as they may still scratch under certain conditions.
Hydrophobic + Oleophobic Coating: An altogether misleading name, this coating isn't nearly as scared of water as water is of the coating. In fact, water runs away at first contact, leaving clear lines of sight that are free from droplets and water marks. The Oleophobic characteristics repel dirt and grease, making the lenses very easy to clean. -
Grilamid TR90: A Swiss technology, this incredible thermoplastic is the material used in all of our sunglasses (with the exception of our metal frames). Its extreme flexibility, durability and light weight make it the perfect material for performance eyewear.
Hydrophilic Nose Pads + Temple Tips: Hydrophilic [anti-slip] nose pads are an important feature to look for in performance eyewear. Hydrophilic temple tips give that extra little bit of grip that can come in handy in many situations. The material we use to make these features is so effective that it actually grips better when it’s wet — exactly when it’s needed.
Ryders Norvan
$59.95 CAD
-
A classic wayfarer shape, loaded with hidden technical elements. Snap hinges, a vented frame to channel airflow, interchangeable nose pads, inner temple hydrophilic rubber, and a metal badge make the Norvan a favourite.
FIT: Medium
Base Curve: 6C
Click Here for Lens Tint DetailsThis is a Canadian company
-
UV PROTECTION: All of Ryders' lenses block 100% of UVA, UVB, and UVC rays, and harmful blue light to 400nm. These harmful rays are a leading cause of cataracts, skin cancer and wrinkles around the eyes—all great reasons to block them out.
HYDROPHOBIC + OLEOPHOBIC COATING: An altogether misleading name, this coating isn't nearly as scared of water as water is of the coating. In fact, water runs away at first contact, leaving clear lines of sight that are free from droplets and water marks. The Oleophobic characteristics repel dirt and grease, making the lenses very easy to clean.
IMPACT RESISTANT: All of Ryders' lenses are impact resistant, meaning they resist breaking up into dangerous little shards when impacted. If astronauts trust this material to keep their heads from exploding while on a 17,000 mph space walk, you’ll have nothing to worry about on your adventures, no matter how fast you’re going.
OPTICALLY CORRECT: The lenses in all of Ryders' sunglasses are made by injecting molten polycarbonate into a mold that is specially shaped to eliminate distortion. This process makes the lenses optically correct, increasing comfort and minimizing eye fatigue.
SCRATCH-RESISTANT COATING: Ryders apply a scratch-resistant coating to all of their lenses. Though this process makes the surface of the lens considerably harder than the base lens material, it’s impossible to make the lenses completely scratch proof (short of making them from diamonds) so please care for them properly as they may still scratch under certain conditions. -
GRILAMID TR90: A Swiss technology, this incredible thermoplastic is the material used in all of Ryders sunglasses (with the exception of the metal frames). Its extreme flexibility, durability and light weight make it the perfect material for performance eyewear.
HYDROPHILIC NOSE PADS + TEMPLE TIPS: Hydrophilic [anti-slip] nose pads are an important feature to look for in performance eyewear. The material Ryders' uses to make these features is so effective that it actually grips better when it’s wet — exactly when it’s needed.
Ryders Pace
$49.95 CAD
-
Driven by the needs of cyclists, the Pace’s lightweight, rimless design ensures that there’s no frame to obstruct your view while in your riding position. The adjustable hydrophilic nose pads and temple tips allow you to fine-tune the fit to optimize airflow, stability and comfort.
FIT: Medium
WEIGHT: 26g
Click Here for Lens Tint DetailsThis is a Canadian company
-
UV PROTECTION: All of Ryders' lenses block 100% of UVA, UVB, and UVC rays, and harmful blue light to 400nm. These harmful rays are a leading cause of cataracts, skin cancer and wrinkles around the eyes—all great reasons to block them out.
IMPACT RESISTANT: All of Ryders' lenses are impact resistant, meaning they resist breaking up into dangerous little shards when impacted. If astronauts trust this material to keep their heads from exploding while on a 17,000 mph space walk, you’ll have nothing to worry about on your adventures, no matter how fast you’re going.
OPTICALLY CORRECT: The lenses in all of Ryders' sunglasses are made by injecting molten polycarbonate into a mold that is specially shaped to eliminate distortion. This process makes the lenses optically correct, increasing comfort and minimizing eye fatigue.
SCRATCH-RESISTANT COATING: Ryders apply a scratch-resistant coating to all of their lenses. Though this process makes the surface of the lens considerably harder than the base lens material, it’s impossible to make the lenses completely scratch proof (short of making them from diamonds) so please care for them properly as they may still scratch under certain conditions. -
GRILAMID TR90
A Swiss technology, this incredible thermoplastic is the material used in all Ryders' sunglasses (with the exception of the metal frames). Its extreme flexibility, durability and light weight make it the perfect material for performance eyewear.
HYDROPHILIC NOSE PADS + TEMPLE TIPS
Hydrophilic [anti-slip] nose pads are an important feature to look for in performance eyewear. Hydrophilic temple tips give that extra little bit of grip that can come in handy in many situations. The material we use to make these features is so effective that it actually grips better when it’s wet — exactly when it’s needed.
ADJUSTABLE NOSE PADS: Adjustable nose pads allow you to customize the fit of your eyewear for comfort and stability. This component is also used for fine-tuning the amount of airflow behind the lens to keep your face cool and combat fogging.
Ryders Pemby Polarized
$79.95 CAD
-
With a diffused frame for enhanced airflow, hydrophilic components for anti-slip stability, three sets of interchangeable nose pads for a custom fit, and premium spring hinges, this model is surprisingly technical given its casual look.
FIT: Medium
Base Curve: 6C
Click Here for Lens Tint Details
POLARIZED TECHNOLOGY: ELIMINATE GLARE AND INCREASE DEFINITION
Where there is light there is always glare. It’s caused when light hits a surface, becomes concentrated, then reflects into your eyes. Polarized lenses eliminate glare from horizontal surfaces [roads, water, ice, snow, etc.] allowing details to show through, drastically reducing eye strain.
Ryders' Polarized lenses are made using an injection process that ensures they’re optically correct, decreasing eye fatigue and increasing comfort. As with all of Ryders' lenses, RYDERS Polarized lenses provide protection against 100% UVA, UVB, UVC and harmful blue light to 400nm.This is a Canadian company
-
UV PROTECTION: All of Ryders' lenses block 100% of UVA, UVB, and UVC rays, and harmful blue light to 400nm. These harmful rays are a leading cause of cataracts, skin cancer and wrinkles around the eyes—all great reasons to block them out.
HYDROPHOBIC + OLEOPHOBIC COATING: An altogether misleading name, this coating isn't nearly as scared of water as water is of the coating. In fact, water runs away at first contact, leaving clear lines of sight that are free from droplets and water marks. The Oleophobic characteristics repel dirt and grease, making the lenses very easy to clean.
IMPACT RESISTANT: All of Ryders' lenses are impact resistant, meaning they resist breaking up into dangerous little shards when impacted. If astronauts trust this material to keep their heads from exploding while on a 17,000 mph space walk, you’ll have nothing to worry about on your adventures, no matter how fast you’re going.
OPTICALLY CORRECT: The lenses in all of Ryders' sunglasses are made by injecting molten polycarbonate into a mold that is specially shaped to eliminate distortion. This process makes the lenses optically correct, increasing comfort and minimizing eye fatigue.
SCRATCH-RESISTANT COATING: Ryders apply a scratch-resistant coating to all of their lenses. Though this process makes the surface of the lens considerably harder than the base lens material, it’s impossible to make the lenses completely scratch proof (short of making them from diamonds) so please care for them properly as they may still scratch under certain conditions. -
GRILAMID TR90: A Swiss technology, this incredible thermoplastic is the material used in all of Ryders sunglasses (with the exception of the metal frames). Its extreme flexibility, durability and light weight make it the perfect material for performance eyewear.
HYDROPHILIC NOSE PADS + TEMPLE TIPS: Hydrophilic [anti-slip] nose pads are an important feature to look for in performance eyewear. The material Ryders' uses to make these features is so effective that it actually grips better when it’s wet — exactly when it’s needed.
Ryders Pint
$49.95 CAD